- HotCoat Powder Silver Lining Metallic
HotCoat Powder Silver Lining Metallic
Item #14117 silver lining
- High-gloss finish with fine metallic sparkle flakes
- Coat and cure in under an hour!
- Easy to apply
- Quick color changes
About HotCoat Powder Silver Lining Metallic
All HotCoat polyester powders are exclusively formulated for the Eastwood HotCoat System. They're optimized to promote static charge for uniform coverage and finish. All are UV- and fuel-resistant, so colors stay bright and vibrant longer. Cure at 400°F for about 20 minutes.
Every 8 ozs. of powder covers the same area as 2-3 cans of spray paint (about 10 sq. ft.), and clean-up is easy, since you simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. All Eastwood powders are virgin TGIC chemistry and packed in airtight, reusable plastic containers.
10198 Original HotCoat Powder-Coating Gun
11676 Dual-Voltage HotCoat Powder-Coating Gun
19415ZP Fast Etch, Quart
12725ZP Powder Stripper, Quart
12582ZP Anodize Remover, Quart
10421 High-Temp. Tape Kit
13266 Magnetic Masking Discs
58112 250-pc. Silicone Cap & Plug Kit
10288Z High-Temp. Lab Metal
10590 Infrared Dual Lamp Cure System
Always wear eye, skin and respiratory protection when powder-coating. Do not cure in an oven that will cook food. Use in a well-ventilated area. Do not use a household vacuum or shop vac to clean up powder, since the electric motor could spark and ignite the powder.
Customers also viewed:
Strips in as quickly as 10 minutes
Starting at: $8.88
2 voltage settings allow complete coverage--tight spots to large areas
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $9.99