• Home
  • Hotcoat Powder Super-Gloss Clear

Hotcoat Powder Super-Gloss Clear

Item #10286 Super-Gloss Clear

Extremely durable, chip-resistant finish; coat and cure in under an hour

In stock

  1. Powder Super Gloss Clear 8 Oz
    Item #10286
    Only $9.39

    In stock

  2. Powder Super Gloss Clear 1 Lb
    Item #10286LB
    Only $12.49

    In stock

  3. Powder Super Gloss Clear 25 Lb
    Item #1028625LBS
    Only $311.29
  4. Powder Super Gloss Clear 50 Lb
    Item #1028650LBS
    Only $622.59


Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

More info...


8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Color: High Gloss Clear
Gloss Level: High Gloss 95%
Cure Temperature: 375 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Eastwood 100% satisfaction guarantee


CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Customer Reviews

Questions & Answers

Customers also viewed: