• Home
  • TIG Welder 200 Amp DC and Versa-Cut 40 Plasma Cutter

    TIG Welder 200 Amp DC and Versa-Cut 40 Plasma Cutter

    Item #14290 Brand: Eastwood

    Save hundreds on this Plasma Cutter and TIG Welder Kit!

    Details

    Save BIG money when you get our TIG 200 DC Welder PLUS our Versa-Cut 40 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

    Eastwood's quality TIG welder, the TIG200 DC Welder, welds steel and stainless steel up to 3/16" thick.* Includes preset post- and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10- to 200-amp. WP17-style torch accepts all common electrodes and collets up to 1/8". High-frequency Mosfet inverter with high-frequency start for precise arc starting and superior puddle and penetration control.
    • 110- or 220-volt AC input
    • 50 to 60Hz
    • 200-amp output DC

      • Eastwood-designed Versa-Cut 40 Plasma Cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8". Compared to mechanical cutting, our Versa-Cut 40 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and cutting power using either 110 or 220 volts, making this a portable unit that is also light weight. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
        • Works with 110v or 220v AC input
        • 20' torch cable; 10' ground cable with clamp
        • Rated 40-amp output
        • Air flow rate: 5-7 CFM at 20-60 PSI
        • Backed by Eastwood's no-hassle 3-year warranty

        *Please note: This TIG200 DC welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 AC/DC Welder which has the high-frequency AC setting needed to properly weld aluminum.

    More info...

    About TIG Welder 200 Amp DC and Versa-Cut 40 Plasma Cutter

    Eastwood TIG200 DC Welder
    TIG welders include preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control. 110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder.

    Eastwood Versa-Cut 40 Plasma Cutter
    This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.


    Contents

    12740 Eastwood Versa-Cut 40 Plasma Cutter
    Includes torch assembly, ground clamp assembly, 110/220V adapter cord

    14100 Eastwood TIG200 DC Welder
    Includes 200 amp output, 110 or 220 Volt AC input, 60 or 50Hz output


    Accessories and Consumables

    12814 Versa-Cut Nozzles, 10 pcs.

    12812 Versa-Cut Electrodes, 10 pcs.

    13953 Eastwood TIG Consumables Kit

    12253 TIG Wire ER70S-2 1/16-36in 1 lb Tube

    Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally, ask for the following:
    Nozzle: Brand – Hypertherm, Part Number 020115
    Electrode: Brand – Hypertherm, Part Number 020167


    Safety

    Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    Welder and plasma cutter come with a three year warranty against manufacturer's defects.


    Instructions

    Click here for TIG200DC instructions



    Click here for Versa-Cut instructions


    Customers also viewed: