Eastwood Destroyer Gray - This versatile solid gray can be paired with other colors in a two-tone, used as an accent or used by itself for overall refinish jobs.
Makes 1 sprayable gallon when mixed 3:1 with a required activator
Approximate coverage: 125 SQ FT
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
Made in the USA
This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.
Rated 4 out of
5 by
Frochevy from
No more yellow Skoolie!The urethane shot well and looks pretty good for our short school bus conversion! It hasn't been on long, but so far looks great and is holding up well.
Hello,
Can this be sprayed over the DTM epoxy primer?. (roll-on)
Asked by: Gary
Yes, the Eastwood Destroyer Gray 3:1 Single Stage can be sprayed over our Eastwood Epoxy primers and Urethane primers along with all of our Eastwood Epoxy and Urethane based paints.
Answered by: Wil Project Advisor
Date published: 2023-11-29
what is anticipated coverage?
is one gallon enough for a 50's picup truck?
Asked by: Gary
Approximate coverage: 125 SQ FT
Not sure what truck model, manufacturer you asking about
Answered by: Anonymous
Date published: 2023-08-24
Can i get a swatch of this color?
Asked by: Guymanperson
Unfortunately, we do not have individual swatches of our colors or samples. The only ways to view this is online, at our retail locations or by ordering this chip chart here: https://www.eastwood.com/ew-branded-color-paint-chart.html
Answered by: Kelly H
Date published: 2022-10-24
Can I spray the Destroyer Gray onto Platinum Rust Encapsulator during the encapsulator recoat time? Do you have instruction that I can download for the Destroyer Gray? Thanks for your help.
Asked by: Sisco
Yes, you can if the surface is level and smooth. We have instructions for all of our 3:1 SSU paints which can be found here: https://www.eastwood.com/images/pdf/50200ZPQ_inst.pdf
Answered by: Kelly H
Date published: 2022-09-23
Do I need the reducer?
Asked by: Leo1
While reducer is not needed. Many people like to reduce this paint 5-10% with a Urethane Grade Reducer.
Answered by: ZachC
Date published: 2022-04-06
I'm going the DIY route and of course have a couple runs on my second coat. How long after I spray a coat will I be able to sand/fix the run in single stage paint?
Asked by: Wags
You will want to wait at least 24 hours before sanding and buffing the single stage.
Answered by: ZachC
Date published: 2022-01-04
I need to repair one of my doors. From what I have read this paint only comes in a 96oz can. Is there a paint code available so that I can have some touch up paint made?
Asked by: Greg
We do not have a paint code for this color other than our item number
Answered by: ZachC
Date published: 2021-11-16
For degreased and clean cast iron, what do you recommend for a primer?
Asked by: MMiller
Self Etching primer would be great for this application in reference.