503 Service Unavailable

Error 503 Service Unavailable

Service Unavailable

Guru Meditation:

XID: 1998502866


Varnish cache server

  • Home
  • Eastwood TIG Welder, Plasma Cutter & Cart Kit
Eastwood TIG Welder, Plasma Cutter & Cart Kit is rated 4.3125 out of 5 by 16.
Rated 5 out of 5 by from good welder and plasma cutter at great price! I was at least a little worried about this welder because of the ultra low price, but with Eastwood backing up the warranty for 3 years I thought it was worth a try! I had never tig welded before and worried that the machine would not be good enough for a first timer. No worries, when I started within an hour I was able to make some decent welds. The plasma cutter worked flawlessly as well! Everything came quickly and was as advertised! I would definitely recommend this combo. One thing though, the welder does not come with a tungsten for aluminum. I would recommend the consumables kit and some filler rod and get ready to weld!
Date published: 2012-12-10
Rated 1 out of 5 by from Thought it was a great buy at first. I thought this was a great buy but was disappointed. When I first bought the machines they worked pretty good but soon after they began to give me trouble. First the tig welders inverter went out and Eastwood swapped it out. The second one was defective right out of the box, Eastwood refunded my money. Now the plasma cutter did great for about 6 months then got where it wouldn't cut so I sent it back for a refund. The replacement I received was junk right out of the box and it also looked to have been used. So-- now I am currently waiting on a full refund, Very disappointed.
Date published: 2014-10-02
Rated 5 out of 5 by from Very good welder & plasma cutter especially for the price! I have had this package for a couple weeks now & have used it for a few hours. My occupation is a sheetmetal fabricator & have done it for 20 years. I use a welder at work that cost $6500 & the welds i can produce with this welder from eastwood are just as good, on aluminum & stainless. It don't have all the bells & whistle settings, but works excellent so far! The plasma has worked great so far also. All i have cut with it so far is 14 ga. Stainless & it worked flawlessly. Don't know how long it will last, but great stuff so far.
Date published: 2013-02-28
Rated 4 out of 5 by from Very good with one exception I am pleased with the TIG and Plasma cart combo. It is a good value and performs well. However, about a half-hour after beginning to use the TIG, the argon regulator gauge ceased to go below 40. The gas still flowed, but I couldn't tell what the pressure really was. The regulator looks a little on the cheap side, so I decided not to bother with the hassle of getting a replacement and bought a more professional regulator.
Date published: 2014-04-08
Rated 3 out of 5 by from parts missing, and broken The plasma cutter had internal air leaks. Tried to get to the "legendary" customer service but the calls went to voice mail and the voice mail box was full multiple times. Finally left a couple messages but no return calls ever came. Didn't want to return the entire box so I took the cover off and found the brass fittings were as tight as they could be, had Teflon tape on them and were CAULKED and worthless. The 2 between the air filter and the entrance to the air gauge adjustment leaked air like they were hand tight. spend 2 hours getting parts and replacing them. The cart went together easyly but it was a bolt and a nut shorrt so that was another trip to Ace. I havent even turned the TIG on yet so I'm not sure about it.
Date published: 2013-05-25
Rated 5 out of 5 by from Both the Tig and Plasma cutter are great I've had a mig for quite a while, but I was looking for something for welding the thinner metals, and also for stainless and aluminum. I really liked the heat control you have with the tig, it's become my favorite welder. My old plasma cutter died, so it was the perfect opportunity to get both the Tig, and Plasma cutter, at a great price. I am very satisfied with these two products. I am restoring a 1955 Chevrolet pickup with my son and these products have made the job a whole lot easier.
Date published: 2013-05-16
Rated 4 out of 5 by from Tig , plasma and cart combo the tig unit works great although I have not used the plasma yet I would expect it works as good as the Tig welder does .I do not like the cart because it is to light duty , you can only put the tig on top and I found that the cart is top heavy which makes it very hard and unstable to move on any surface that is not very level and smooth.
Date published: 2014-11-26
Rated 5 out of 5 by from Overall very pleased I needed the ability to weld and cut aluminum without the price or complication of the "blue" and "red" boxes. I have a few minor gripes about both machines but can live with them based on price point! First off, the Tig unit is physically large. This may be good (lots of cooling area inside) but if you are thinking about being able to use a "mig" cart with this unit, think again. Get the Eastwood tig cart with the flat top which is made for it. The electrode connection point on the front of the machine is not a standard size (dinse being standard) so fitting any other torches to the machine is going to be a challenge. The foot pedal has two cables running out of it to the welder. These are loose from the factory, nothing major I just ziptied them together. The literature with the machine is fuzzy about the ability to use alloyed tungstens (lanthanated and ceriated in particular). I haven't had the machine long enough to explore all possible combinations of tungstens to see what it works best with but I will be before long. The plasma cutter is phyiscally very small for such output. The 40 amp machine is rated at 3/8" severence and I believe that's selling it short. I was able to whiz through 1/4" steel quickly. I LOVE the pilot arc feature on the plasma, my older plasma had no pilot feature so it was basically a "lift arc" plasma torch. It resulted in a lot of cutter tip replacements due to fouling from blowback. So far I've sliced through aluminum plate, steel plate, and steel tube with the plasma and it handled them all easily. As others have mentioned, the "helmet" they provide the machines with is utterly useless. Eastwood would be better off just not even including it and warning potential buyers that they needed to purchase a true welders helmet before using the product. Other than these small complaints, I'm very pleased with all three components in this bundle. They all worked straight out of the box and functioned as promised.
Date published: 2014-05-12
  • 2015-05-25T10:59CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_14037, PRD, sort_relevancy
  • clientName_eastwood

can you us small stick rods with the tig 200 or is it only tig

Asked by: play time
It is a TIG only unit. Not a TIG/Stick
Answered by: SeanA
Date published: 2015-05-21

What is the country of ORIGIN? What country are these made???

Asked by: RobertG
They are made in china
Answered by: SeanA
Date published: 2015-04-20
  • 2015-05-24T14:55CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_14037, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Eastwood TIG Welder, Plasma Cutter & Cart Kit

Item #14037 Brand: Eastwood

MAJOR savings on our TIG Welder, Plasma Cutter & Cart Kit!

Details

Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut Plasma Cutter, and organize it all on the Cart included! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

Eastwood-engineered TIG 200 AC/DC Welder offers professional-quality TIG welding at an affordable price!
  • This exceptional TIG welder operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
  • 1/4"-thick welding capacity
  • High-frequency start for precise arc control
  • Square-wave inverter for accurate aluminum welding
The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8" thick.
  • 110v or 220v AC input with inverter technology
  • 20' torch cable; 10' ground cable with clamp
  • Rated 40-amp output
  • Now with a black powder-coat finish
Our Multi-Unit Welding Cart is designed specifically to keep all your Eastwood welding and cutting equipment and accessories organized.
  • Top shelf holds the TIG-200 welder (or either of our MIG welders)
  • Bottom shelf holds the Versa-Cut Plasma Cutter
  • Middle shelf is for welding supplies storage
  • Gas-bottle mount includes a TIG rod holder

Click here for welder warranty information


More info...

About Eastwood TIG Welder, Plasma Cutter & Cart Kit

TIG200 Welder
Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre/post flow adjustment knobs to protect your weld and torch. If that's not enough, it even has a foot pedal to control amperage so you can get going quickly and not need to dial-in the machine for a specific material. Included is the TIG200, torch, ground cable/clamp, regulator/hose, and is powered through a NEMA50 plug.

Plasma Cutter
This innovative, affordable, best plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

Multi-Unit Cart
This welding cart was designed to make storage, accessibility and maneuverability of your welder and cutter easier than ever before when metalworking. This cart incorporates a top shelf which will hold our MIG135, MIG175 or TIG-200 welder. The bottom shelf will store your Versa-Cut Plasma Cutter, while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.

What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000° F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.


Contents

TIG200 Unit
Shielding Gas Regulator
Shielding Gas Hose
Ground Cable with Clamp (10ft)
TIG Torch (17 Series) which accepts industry standard cups, collets, and collet bodies (14 ft.)
Foot Pedal for Amperage Control
110v-to-200v Adapter Plug
Manual
Hand Held Shield
Hammer/Brush
#7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
Long Back Cap, Short Back Cap
3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
2.0mm Red (Thoriated Tungsten)

Versa-Cut Plasma Cutter
Torch Assembly
Ground Clamp Assembly
110/220v Adapter Cord

Welding Cart
Assembly Instructions


Specs

•Input voltage: single phase 110 or 220 VAC (+/- 15%) @ 50-60Hz
•Input amperage: 28 amp
•Output amperage: 10-200amp AC/DC
•No-load voltage: 51
•AC duty cycle (%): 20-80 (80% at 100 amp- 20% at 200 amp)
• Pulse duty cycle (%): 10-90
•Post gas flow: 2-8 sec
•Pre gas flow: 0.1-1 sec
•Remote foot pedal and control: yes
•Efficiency: (%): 80
•Weight: 44lbs
•The cleaning/clearance effect (AC balance control) of our unit is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive
)•The frequency is fixed at 60Hz which provides a little wider bead but with good penetration for aluminum and magnesium.
•Our Tig 200 is constructed with inverter and MOSFET technology for optimum performance at a very affordable price.

Accesories

TIG Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves

Consumables

1/6 Inch Collet Body
3/32 Inch Collet Body
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungstenl
2 Pack Stainless Steel Scratch Brush


FAQs

Consumable parts can be purchased through Eastwood


Safety

Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants. Do not use around flammable materials! Do not open machine! There are no user-serviceable parts! This cart is intended to hold an 80 CF gas bottle; using a bottle larger is not recommended.


Warranty

Click here for welder warranty information


Instructions

TIG

Click here for instructions


Plasma Cutter

Click here for instructions


Customers also viewed: