- EW Plastic Resurfacer Matte Black Aerosol
EW Plastic Resurfacer Matte Black Aerosol
Item #15089Z Brand: Eastwood
Eastwood's Plastic Resurfacer Aerosol will restore and resurface your plastics, returning the materials to their original luster. Not just another wipe-on coating--this is a permanent repair!
- Passed 2500 hours of ASTM D4587 QUV testing
- 7+ years of UV resistance
- Not just a temporary fix, apply once and you're done
- Permanently restores automotive plastics
While most competitor products are only temporary solutions that sit on the surface, Eastwood's Plastic Resurfacer is a permanent repair. This resurfacer is not simply another plain paint or wipe-on coating, it gets deep within the plastic to re-flow the plastic and restore that factory finish look!
Warning: This is a potent product which re-flows the plastic surface and adds back color that the sun has faded away, mask around all areas to be treated and follow all safety guidelines in instructions.
About EW Plastic Resurfacer Matte Black Aerosol
With 7 year UV resistance, this is not just another black paint or wipe on coating! Eastwood Plastic Resurfacer actually reflows and resurfaces all faded and chalky exterior matte black plastic automotive parts and bedliner material leaving a factory fresh, deep black finish. It passed 2500 hours of ASTM D4587 QUV testing, that's equal to 7 years in the hot baking sun without fading. unlike many wipe on products It actually etches and reflows the surface embedding black resins into the substrate and maintaining the original texture. Compatible with all automotve plastics and urethanes.
Net Weight 11 ounces
52065Z SEM Plastic Prep, 14745 Handy Masker, 51515 2 inch Masking Tape
Always wear eye, skin and rrespiratory protection. Use in a well ventilated area away from open flame. Consult MSDS for specific dafety precautions.
Made in USA
Ensure surface is clean and free of debris. Wash with soap and water, let dry. For really dirty surfaces with embedded contaminants, use SEMs Plastic Prep. Shake can for 2 minutes. Hold can 8 to 10 inch from surface, apply in light coats waiting 5 to 10 minutes bewteen coats. Apply until complete coverage is acheived 2 to 4 coats. Do not apply heavily, allow the surfacer to penetrate the substrate.
Customers also viewed:
Hand-masking tape with tape dispenserOnly $10.99
Snap onto a standard aerosol can for ergonomic, effortless, controlOnly $5.99
Removes silicone, wax, polish, grease; promotes paint/powder adhesion
Starting at: $6.99
Cleans, slightly softens plastic to promote adhesion of dyeOnly $14.99