• Home
  • Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol
Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol is rated 3.6 out of 5 by 20.
Rated 4 out of 5 by from Welds great but hard to spray the last third I bought this for welding in new floor pans and patch panels on my Nova. Works great and sprays good for most of the can. When the can got low its almost like there wasn't enough propellent and it started to spit and sputter. Welds great, doesn't seem to bother the welder and doesn't burn too much. I ordered more.
Date published: 2014-02-10
Rated 3 out of 5 by from Better than nothing Great for getting in areas that get sealed up/overlapped and cant get top coated. It does add to the resistance of the weld, so you'll need a little more voltage. comes right off when you wire brush the slag afterwards though... Also, "self etching" paint is said to conflict with magnetic paints, like Monstaliner. so dont use this if you plan to use magnetic paints....
Date published: 2014-11-10
Rated 5 out of 5 by from great product I have used other Eastwood products with great success and decided to try this one. This paint is great! I have used the weld-thru primer for the backside of patches prior to welding and was very pleased with the results. I would like to see Eastwood make smaller sized spray cans to get into hard to reach places.
Date published: 2015-03-03
Rated 1 out of 5 by from Lids popped off - 4 Qts gone I bought 4 quarts and it was in the car in the box. Had to go to work for a few months and when I got back to prime and to weld the roof skin and floors in - the lids had popped off or loose and all dried up. Didn't even get to try it. I want my money back - I'll ship the cans back.
Date published: 2015-02-27
Rated 2 out of 5 by from Not much better than the 5 dollar rustoleum The stuff sprayed really thin took 2 to 3 coats so I could not see through it to the bare metal. When spraying it (2 different cans) it wanted to spray puddles out occasionally. The can's I used didn't cover half the square footage that the can says it will.
Date published: 2014-08-05
Rated 1 out of 5 by from I want my money back! Like others have said. Horrible as a weld thru primer. Takes away the ground path for the welder. CAUSES SPATTER. is good for stuff u can't access later, but u might as well save some money and use a normal primer and just remove where u r going to weld
Date published: 2015-01-02
Rated 2 out of 5 by from Not worth it Horrible as weld-thru. Poor arc and lots of spatter, hit-and-miss whether it welds through or not. May work better with thicker metal, but with lower settings for sheet metal its awful.
Date published: 2013-02-13
Rated 3 out of 5 by from Why did Eastwood stop selling the Quarts? I liked the quarts, it made it easier to get a consistent primer coat. Now I have to rattle can the area, and then follow up with the standard self etching primer. Just not as good.
Date published: 2014-04-26
  • 2015-07-04T10:02CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_12899Z, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol

Item #12899Z Brand: Eastwood

Combines benefits of a weld-thru and traditional self-etch primer

Details

Eastwood's Self-Etching Weld-Thru Primer combines the benefits of a weld-thru and the capabilities of a traditional self-etching primer.

This unique self-etching primer formula has organic binders that replace conductive heavy metals such as copper and zinc. These organic binders will burn off during the welding process, leaving a corrosion-resistant self-etching primer for paint prep. This product will reduce spatter and distortion caused by excessive heat that occurs during the welding process. Compatible with MIG, TIG and Arc welding. The metal-etching primer will enhance adhesion and durability and is compatible with most top coats.

  • Enhances adhesion and durability of top coats
  • Prevents corrosion and reduces spatter
  • Non-conductive organic binders
  • Gray color

More info...

About Eastwood Self-Etching Weld-Thru Primer 16oz Aerosol

Eastwood's Self-Etching Weld-Thru Primer combines the benefits of a weld-thru and the capabilities of a traditional self-etching primer.

This unique self-etching primer formula has organic binders that replace conductive heavy metals such as copper and zinc. These organic binders will burn off during the welding process, leaving a corrosion-resistant self-etching primer for paint prep. This product will reduce spatter and distortion caused by excessive heat that occurs during the welding process. Compatible with MIG, TIG and Arc welding. The metal-etching primer will enhance adhesion and durability and is compatible with most top coats.

  • Enhances adhesion and durability of top coats
  • Prevents corrosion and reduces spatter
  • Non-conductive organic binders
  • Gray color


Contents

16.1 oz Net Weight Gray in color


Accessories

Eastwood PRE Painting Prep


Application

Clean surface with Eastwood's PRE, prior to applying primer.Apply 2 medium wet coats, allowing 5 minutes flash time between coats.Allow to cure at least 20 minutes prior to welding.


Safety

Always consult MSDS for specific safety and hazard warnings. Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area away from an open flame.


Warranty

Made in USA NSN #


Application

Clean surface with Eastwood's PRE, prior to applying primer. Apply 2 medium wet coats, allowing 5 minutes flash time between coats. Allow to cure at least 20 minutes prior to welding.


Customers also viewed: