• Home
  • Hotcoat Powder Translucent Blue

Hotcoat Powder Translucent Blue

Item #10089 Translucent Blue

Extremely durable, chip-resistant
finish; coat and cure in under an hour

In stock

  1. Powder Translucent Blue 8 Oz
    Item #10089
    Only $10.79

    In stock

  2. Powder Translucent Blue 1 Lb
    Item #10089LB
    Only $14.29

    In stock

  3. Powder Translucent Blue Powder 25 Lb
    Item #1008925LBS
    Only $299.99
  4. Powder Translucent Blue 50 Lb
    Item #1008950LBS
    Only $479.99
$0.00

Details

Do The Job Right with Eastwood Powders!

  • Provides extremely durable finish
  • Contains no environmentally harmful solvents
  • 100% Virgin powder
  • Impact resistant and flexibility
  • Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Note: split images - right side is over chrome, polished metal, Argent Silver Base Coat, or Reflective Chrome, left side is over bare metal, 10303 Rally Wheel Silver, and 51082 OEM Wheel Sparkle Silver.


More info...

Contents

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags


Specifications

Color: Translucent Blue
Gloss Level: Full Gloss 90+%
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Urethane
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.


Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.


Warranty

Eastwood 100% satisfaction guarantee


Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques.


Customer Reviews

Questions & Answers

Customers also viewed: