• Home
  • Panel Separating Knife
Panel Separating Knife is rated 4.6 out of 5 by 8.
Rated 4 out of 5 by from Great product when you have a lot of welds I have two project vehicles, both needing a fair amount of work (replace floor, firewall, cowl, and more) between the two of them and the Wacker-Smacker has been a HUGE help. I have drilled out several hundred welds already, and there always seem to be parts of the welds that still get missed. With this panel separating knife, I smack through the remaining weld at angles that I couldn't get with a cold chisel or thin flathead screwdriver. Hammering on the side of the blade to make a lateral cut can make your hands ring, so a heavier padded glove can really help. But it is great to be able to do that to help prevent tearing out the metal, or having to drill a second hole to get the remaining part of the weld. This definitely can make a tough job a little easier.
Date published: 2009-09-10
Rated 4 out of 5 by from super tool If your doing body repairs, like I do on old VWs this type of tool is a must have....this one is perfect and does the job right...so do your self a favor and add one of these to your tool box and trick bag ...you will be happy you did.
Date published: 2011-08-08
Rated 5 out of 5 by from Great product great price I replace panels on buses everyday and this tool has been a life saver it also takes the abuse of being beet with a hammer with no issues. Highly recommended.
Date published: 2015-07-19
Rated 5 out of 5 by from Made the task very easy Made the task very easy. I was struggling try to remove the rivets. Good tool for the job.
Date published: 2015-11-15
Rated 5 out of 5 by from Takes a beating an comes back for more. Got this too a few months ago help me separate some sheet metal from my floor. I was truly surprised how it broke through spot welds and folded over metal. Banged and pounded on this tool repeatedly and still looks new. Only con is the head is about 1/4" by 1 1/2" When you miss it will hurt tomorrow.
Date published: 2016-11-21
Rated 4 out of 5 by from Handy tool, BUT This tool performs just as the description said it would, Great for splitting and finding spot weld. HOWEVER, it can really sting the hand when struck. Make sure you wear some good padded gloves. Great tool!!
Date published: 2013-11-07
Rated 5 out of 5 by from REALLY TAKES A BEATING GREAT TOOL FOR THE JOB. COULD BE ABOUT THREE INCHES LONGER TO GET AT CERTAIN SPOTS, BUT THIS KNIFE WORKS GREAT IN TANDEM WITH THE SKIP PROOF SPOTWELD CUTTER. NICE JOB EASTWOOD. YOUV'E NEVER LET ME DOWN
Date published: 2013-03-24
Rated 5 out of 5 by from works as advertised This tool separates body panels with no problem. Edge stays sharp, and is capable of cutting sheet metal if needed.
Date published: 2015-11-07
  • y_2017, m_2, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_31138, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Panel Separating Knife

Item #31138 Brand: Steck Manufacturing Company Inc

Insert between panels and lightly
hammer to gently wedge panels apart
Panel Separating Knife Even after you've drilled out spot welds, separating panels can be tough. With Eastwood's new "Smacker-Whacker" simply insert the heavy-duty Sheffield steel blade between the panels and lightly hammer the blade back to gently wedge the panels apart (or smack it there, and give it a whack!) 8 3/8" overall length.

Details

Panel Separating Knife Even after you've drilled out spot welds, separating panels can be tough. With Eastwood's new "Smacker-Whacker" simply insert the heavy-duty Sheffield steel blade between the panels and lightly hammer the blade back to gently wedge the panels apart (or smack it there, and give it a whack!) 8 3/8" overall length.

More info...

About Panel Separating Knife

Panel Separating Knife Even after you've drilled out spot welds, separating panels can be tough. With Eastwood's new "Smacker-Whacker" simply insert the heavy-duty Sheffield steel blade between the panels and lightly hammer the blade back to gently wedge the panels apart (or smack it there, and give it a whack!) 8 3/8" overall length.


Contents

Knife measures 8 3/8" overall with 4 1/2" working blade length. Blade is 1/4" thick and tapers to knife edge.


Customer Reviews

Questions & Answers

Customers also viewed: