Thank You $25 Off $125
  • Home
  • Spotweld Cutter Pro Kit 3/8 And 1/2 in
Spotweld Cutter Pro Kit 3/8 And 1/2 in is rated 3.2 out of 5 by 12.
Rated 5 out of 5 by from Great tool. I am on my second car and still using the same tool. These are 100% time saver, so easy to use. I recommend using Tap Magic as a lubricant once I start the center point and then start slowly until full tool is cutting. Never had any walk by using this method.
Date published: 2019-01-07
Rated 5 out of 5 by from worked better than any other I tried spot welds are difficult as we all know , but these bits worked the best. I am removing 1970 floor sheet metal from a challenger so heavy sheet metal, and these bits saved so much time over the cheap bits that would not start or stay any where near center, yes they do walk some but spot welds are not perfectly round, drilled out the entire floor and still not dull.best one I have used
Date published: 2018-08-03
Rated 5 out of 5 by from great spot weld cutters These cutters are the only way to remove spot welds . They work awesome !
Date published: 2014-02-07
  • y_2019, m_8, d_23, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_19004, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Spotweld Cutter Pro Kit 3/8 And 1/2 in

Spotweld Cutter Pro Kit 3/8 And 1/2 in

Item #19004 Brand: Eastwood

2 solid M2-steel cutters drill-out spot welds effortlessly
Quantity:
Quantity: close

In stock

Components Price: $67.06

You Save $5.07
Only $61.99

 

< Back

Details

Solid steel Pro Spotweld Cutter Set effortlessly drills-out spot welds Two 1-piece cutters make clean cuts through spot welds, without damaging the bottom panel, with little or no grinding required to finish the job.
  • 3/8" (10mm) diameter
  • 1/2" (13mm) diameter
  • Solid, 1-pc. M2 steel
  • Self-centering point prevents "drill walking"
  • Over 300 cuts without sharpening

More info...
< Back

About Spotweld Cutter Pro Kit 3/8 And 1/2 in

Professional-grade cutter totally drills-out spot welds, with little or no grinding required to finish the job. Solid one-piece cutter is machined from M2 tool steel. Self-centering point prevents "drill walking". Extremely durable and long-lasting—shop tested at over 300 cuts without re-sharpening. 3/8"-diameter cutter works for most applications; 1/2"-diameter cutter is for trucks and convertibles. Drill at 700 to 2,000 RPM.


Contents

2 Pro Spotweld Cutters: 3/8" and 1/2" diameters


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: