• Home
  • Eastwood TIG Welder 200 Amp DC

Eastwood TIG Welder 200 Amp DC

Item #14100 Brand: Eastwood

Tackle precision fabrication tasks in your garage.

Details

Weld steel and stainless steel up to 3/16 inch thick*

Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
  • 110 or 220 volt
  • 50 to 60Hz
  • 200 amp output DC TIG welder.

    *Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.

More info...

About Eastwood TIG Welder 200 Amp DC

110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder. Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp,WP 17 style torch accepts all common electrodes and collets up to 1/8 inch.High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.


Contents

•TIG 200 DC Unit with NEMA50-P Plug
•Shielding Gas Regulator
•Shielding Gas Hose
•Ground Cable with Clamp
• #17 TIG Torch (14’)
• Foot Pedal for Amperage Control
• 110-120 VAC to 220-240 VAC Adaptor Plug
• Instruction Manual
• Hand Held Shield
• Hammer/Brush
• #7 Cup (7/16”
) • #6 Cup (3/8”)
• #5 Cup (5/16”)
• Long Back Cap
• Short Back Cap
• 3/32” Collet Body
• 3/32” Collet
• 1/16” Collet
• 2.0mm Collet
• 2.0mm Red (Thoriated Tungsten)


Accessories & Consumables

13953 Eastwood TIG Consumables Kit
1/6 Inch Collet Body
3/32 Inch Collet Body
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel Tig Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungsten
2 Pack Stainless Steel Scratch Brush

Accessories

TIG Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves


Safety

Always where eye, hand and face protection when welding.


Warranty

Three year warranty against manufacturer's defects.


Instructions

Click here for product instructions


Customers also viewed: