Details

This money saving combo includes the Eastwood Versa Cut 60 Plasma Cutter and the Eastwood MIG175 Welder.
Tackle heavy metal fabrication jobs with ease. The MIG 175 has the power to weld up to 5/16" in a single pass and the Versa-Cut Plasma Cutter can slice up to 7/8" thick steel.
Eastwood's MIG 175 Welder: "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-working', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition! Also includes a free spool gun to weld aluminum, a $199 value
Versa-Cut 60: 220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.

Pinch Weld Clamps

Only $24.99

1 Review(s) | Add Your Review

Large-View Auto-Darkening Welding Helmet

Only $89.99

Sale $69.99

10 Review(s) | Add Your Review

Magnetic Welding Small Jig Set

Only $9.99

1 Review(s) | Add Your Review

About Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

Eastwood MIG 175with spool gun
MIG 175 welder is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration.

Eastwood Versa-Cut 60 Plasma Cutter
220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.

14099 Eastwood Versa-Cut 60 Plasma Cutter
60 amp output,220 Volt AC input, 60 or 50Hz output. 60% duty cycle at60 amps. 40lb weight

12012 Eastwood MIG 175with spool gun
Includes Spool Gun with 9' cable (works with 2-lb. wire spools only), MIG Wire 0.030, Aluminum Wire 0.030, Gas Regulator with hose, 8' Ground Clamp, 8' Gun Cable

Plasma Shades - Plasma Cutting Glasses

Eastwood Welding Cart

Eastwood's Plasma Cutting Guide

Welding Jacket

Large View Auto Darkening Helmet

Welding Gloves

Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.

3 Year warranty against manufacturer defects.

Click here for Eastwood MIG 175with spool gun instructions

Click here for Eastwood Versa-Cut 60 Plasma Cutter instructions