Item # 30016 BRAND: Woodward Fab

Bench Mount Drill Press 1/2 in Chuck 5/8 HP

Includes digital readout, laser sight, 1/2" chuck and more
Includes digital readout, laser sight, 1/2" chuck and more
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 24.35ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$469.99
Loading...
Loading...
Save for Later
Includes digital readout, laser sight, 1/2" chuck and more
  • 90-Day Returns
  • Technical Support
Bench Mount Drill Press 1/2 in Chuck 5/8 HP

Description

Woodward Fab Drill Presses have all the right features, laser sights, variable speed, digital readouts, cast iron table and base, tilt table, and spring tension safety guard. This bench mount model features a 1/2-Inch Chuck, 5/8-HP Electric Motor, 2-inch Spindle Travel, 7-Inch by 7-Inch Table, 25-Inch Height, and weighs 60 pounds.

Warranty

Imported.

Contents

Bench Mounted, 1/2 Inch Chuck, 5/8 HP Motor, 2 Inch Spindle Travel, 7 Inch x 7 Inch Table, 25 inch Height, 60lbs

FAQs

5/8 HP Motor, 110 VAC Input Power, Laser Sights, Variable Speed, Digital Read Out

Safety Information

Always wear ANSI rated safety glasses and hand protection when operating.

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 23.47ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

What’s length,width,and height?

Asked by: Mike
55 × 22 × 9 in
Answered by: Kelly H
Date published: 2021-09-16

What is the speed range? From 0 to what?

Asked by: Mike
Unfortunately, with this shipping directly from Woodward Fab, we recommend reaching out to them directly for this info Woodward Fab 1-800-391-5419
Answered by: ZachC
Date published: 2021-09-13

When drilling something, the pulley continues to turn while the shaft with the taper the chuck connects to stops making it VERY difficult to drill anything.Is there a way to adjust this? The shaft can be turned by hand while the pulley is held stopped.

Asked by: Motoman
We apologize for the inconvenience as well as for the confusion. This item drop ships directly from the manufacturer: Woodward Fab. We do not have any of these units here so we would have to advise you to contact the manufacturer directly. Their number should be in the instruction manual which came with this unit upon arrival.
Answered by: Kelly H
Date published: 2019-03-25

What is the spindle taper size?.

Asked by: James
Unfortunately this is a specification outside of what the manufacture gives us for this machine.
Answered by: Scott C
Date published: 2018-09-19

How are speeds adjusted?

Asked by: emarion
Speeds are adjusted variable speed so as it is running their is an orange knob on the side of machine you turn to increase or decrease, the digital readout it will tell you what speed you are at.
Answered by: SeanW
Date published: 2019-04-27

Is this drill press OSHA aproved for the Guard and does the motor stay shut off if the power goes out and comes back on 

Asked by: MaxZoe
This drill has zero OSHA ratings or approvals.
Answered by: Scott C
Date published: 2017-10-27

What is the swing or center of chuck to column measurement on this drill?

Asked by: Mademachineco
This would be about 4 1/2 ".
Answered by: KHoffnagle
Date published: 2017-09-19

How many amps

Asked by: Johnddrrffyywqbnmu
This unit will draw 3.75 amps.
Answered by: S Church
Date published: 2017-05-16
  • y_2021, m_10, d_15, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_30016, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 56.81ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Bench Mount Drill Press 1/2 in Chuck 5/8 HP
$469.99
In Stock