Memorial Day Sale
Fathers Day Gift Guide
  • Home
  • Eastwood Concours PRO HVLP Paint Gun 1.3mm
Eastwood Concours PRO HVLP Paint Gun 1.3mm is rated 4.1 out of 5 by 12.
Rated 5 out of 5 by from Great Gun! I have been using this gun for sealer for about a year with zero issues it lays sealer down very slick at 30 psi. I have used it for basecoat as well and it does very well. I would not recommend for clear coat due to orange peel, any hvlp gun in my opinion is not the best choice for clear. I have used Sata 5000s Iwata Supernovas DeVilbiss Teknas at a high production shop and this gun (for the money) is right there with them for reliability and performance so far. Very versatile. VERY comfortable in the hand!
Date published: 2019-03-03
Rated 5 out of 5 by from Durability I've been using my Concourse Pro in a production setting for year now it's the only gun I use in the paint booth. My paint jobs are as slick and as Good As the guys who have $800 paint guns I'll be buying another one soon!
Date published: 2018-11-08
Rated 5 out of 5 by from great gun I purchased this just for clear. I was having difficulties with my DeV laying clear down flat it would do great on base but clear just couldn't do it. So after speaking with a customer rep. and watching my hero Kevin T video's on this gun I jumped on it. I just painted a trunk lid test panel Much better than my DeV it atomized much better. I still had some orange peel, but still getting use to the gun distance. on the concours pro the recommended distance is 8-12". The amount of orange peel is not bad for a first test, a hair from factory I would say and with alittle sand and buff should be like glass. All in all great gun, great price, feels good in hand, easy to dial in, great atomization.
Date published: 2017-08-31
  • y_2019, m_5, d_21, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_14771, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Hello i have the concourse pro gun. Can i use my 3hp 20 gallon 6-8 cfm @ 40psi compressor with this gun, to paint a car? Thanks , Doug.

Asked by: Doug72
If your compressor can put out 8 cfm @ 40psi this will run the paint gun fine.
Answered by: SeanW
Date published: 2019-01-30

Will this gun handle sound deadening paint like Lizard skin?

Asked by: Robert
Yes this paint gun will work to spray your Lizard Skin, however you will need to install a larger need and tip in the gun. Item number is 14775 and that will give you a 2.0 fluid tip.
Answered by: Bob G
Date published: 2018-12-09

I get 6 CFM's @40 PSI. Can I use this gun or is the Concourse 2 better for my compressor?

Asked by: design diva
This paint gun would run perfect with the compressor you have.
Answered by: SeanW
Date published: 2018-11-09

With this gun can I use regular water base semi gloss paint to do kitchen cabinets

Asked by: Mike
Yes water based paints can be sprayed through this gun.
Answered by: Kelly H
Date published: 2018-10-16

what air pressure do you set the gun for acrilic enamel

Asked by: rat fink
You will want to verify the air pressure with the paint company to get an exact pressure.
Answered by: SeanW
Date published: 2018-10-10

Which way do you turn the needle seat with the tool  My new one is stuck on tight and I want to be sure before I put a lot of force on it 

Asked by: Wylie
Every part of this paint gun is standard thread. A simply counter clockwise motion will loosen up standard parts that are designed to come apart.
Answered by: Scott C
Date published: 2018-08-06

Other than the entire rebuild kit, can you order individual parts for this gun? For example a particular seal or nut? I ran into this problem with another brand of gun.

Asked by: kgmatthe
At this time the rebuild kits are the only way to get wearable parts on our paint guns.
Answered by: Scott C
Date published: 2018-05-30

I have a Husky 30 Gal. 155 PSI Ultra-Quiet Portable Electric Air Compressor which produces 6.2 CFM @ 40 PSI. Not sure what CFM at 30 PSI. Will this gun work with this compressor? I see online there are several descriptions say low as 4 CFM. This true?

Asked by: Barnacle
The Concours Pro requires 6.5 CFM. Your compressor would only really be able to power this paint gun for smaller projects and not a whole car at one time. You may want to look into our Concours 2 gun which will require about 5 CFM minimum.
Answered by: Scott C
Date published: 2018-05-21
  • y_2019, m_5, d_23, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_14771, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Concours PRO HVLP Paint Gun 1.3mm

Eastwood Concours PRO HVLP Paint Gun 1.3mm

Item #14771 Brand: Eastwood

Professional quality full size HVLP paint gun, without the professional price
Quantity:
Quantity: close

In stock

Only $227.99

Sale $169.97

 

< Back

Details

Professional quality full size HVLP paint gun, without the professional price.

  • Professional quality at a DIY price
  • Low CFM – Full size gun 6.5CFM @ 30PSI
  • Ultra-fine atomization from 1.3mm needle/nozzle
  • Compatible with all types of coatings
  • Full line of accessories available

The Eastwood Concours PRO HVLP paint gun goes head-to-head with the top spray guns from the big brands, but at a price the home user can afford. The precision machine work used to produce this gun provides ultra-fine atomization of coatings and years of durability. It features stainless steel internal passages, so it can be used with solvent and waterborne coatings without fear of reaction or corrosion. Engineered specifically to work with smaller air compressors, it requires some of the lowest CFM of any high volume low pressure paint gun on the market.


More info...
< Back

Contents

(1) HVLP Paint Gun with 1.3mm fluid nozzle
(1) 600cc Acetyl Paint Cup
(1) Cleaning set
(1) Manifold Removal Tool


Specifications

• 6.5 CFM @ 30 psi (2 to 2.5 Bar)
• 1/4" male NPT input threads
• M16 x 1.5 NPS paint cup attachment threads
• 1.3mm stainless steel needle/nozzle set (others available)


Instructions

Click here for product instructions


Safety

Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Follow paint manufacturer's safety information. Always paint in a well ventilated area, away from open flame and sparks.

Click here to see safety products


Warranty


Accessories

14773 1.3mm needle nozzle set
14774 1.7mm needle nozzle set
14775 2.0mm needle nozzle set
51550A 600cc Nylon Cup
51550B 600cc aluminum cup
50207 DeKups adapter
11549 3M PPS Adapter
51559 digital regulator
34113 analog regulator
12846Z Aerosol Injected Cleaner


Product Video


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: