ROTATING ASSEMBLY:

• New BluePrint Cast steel crankshaft
  3.750" Stroke
  OEM type 5.700" connecting rods w/ 150,000 psi bolts
  Hypereutectic pistons
  External Front/ External Rear

CYLINDER HEADS:

• BluePrint Aluminum Cylinder Heads - H8002K
  64cc chamber
  2.02" intake/1.60" exhaust valves
  195cc intake/75cc exhaust runners

CAM SPECS:

• Cam Type: Roller
  .544 Intake .555 Exhaust
  230 Intake / 236 Exhaust duration
  @ .050, 110 ° lobe separation angle

IGNITION TIMING:

• 34 Degrees Total at 3500 RPM

ALSO INCLUDES:

• Premium Vintage Valve covers
• Premium Vintage Air Cleaner
  6.75 inch Harmonic balancer
  Spark plugs
• Under Header Spark plug wires (Perfect for Rams Horn exhaust manifolds)
• Long Style Water Pump
  Fuel Pump and feed line
  Oil pan
  Timing cover
  Aluminum Intake Manifold
  Small cap Ready to run distributor equipped with Tach Drive and coil
  750cfm Carburetor
  Dyno tested and shipped with results
• Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (Does not fit Corvette) See images for Dimensions
• Warranty:

• 30 month / 50,000 mile

NOTES:

• Not for use in pollution-controlled vehicles.

  Air cleaner has a maximum height of  11.5 inches when measured from block end rail (Horizontal sealing surface under the intake manifold)

  The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.

  • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke,