- Home
- Eastwood Abrasive Media Blast Cabinet
Eastwood Abrasive Media Blast Cabinet
Item #20161 Blast Cabinet
Details
Effectively Blast Large Vehicle Parts.The Eastwood Abrasive Blast Cabinet will provide you with an effective abrasive blasting tool that is easy to assemble and has a large internal size.
- Exterior: 36-1/4” width x 24-1/4” depth x 58-3/4” height
- Interior: 36” width x 24” depth x 23” height
- Easy bolt design assembles in 2 hours with 2 people
- Vacuum port designed for 1 1/2" vacuum hose
- Large 22” by 10.5” viewing window
- Requires 7 cfm @ 90 psi
- Cabinet ships FedEx ground
This blast cabinet has an internal light, low volume, non-duning hopper design with a high flow 15” Hg blast gun. It also has a large top opening design that eliminates the need for side doors and allows you to place the cabinet against a wall in a shop. Plus, it comes with window liners and grip-textured gloves to ensure a secure grasp on all objects.
NOTE Ships in 2 Boxes - BOTH Box 1 and Box 2 are required to assemble a complete Blast Cabinet.

The Abrasive Blast Cabinet is the largest blast cabinet on the market that does not require truck shipping costs or drop gate fees, saving you a lot of money. It is built very sturdily with the capability to hold items up to 125 pounds. It has a wide top opening allowing you to fit 20” wheels, under hood components, suspension components and more. It has an internal hopper design that eliminates duning of deep V hoppers that other competing models struggle with. For best results, use with a compressor capable of at least 10cfm @ 80-90 psi.
Contents
Eastwood Blast Cabinet 20027 is Shipped in two boxes.
20161A BOX 1 and 20161B BOX 2 are needed to assemble a complete blast cabinet.
Specifications
Compartment size - 36 inch w x 23 inch H x 24 inch Deep.
Overall height 58-3/4"
Overall Width 36-1/4"
Overall Depth 24-1/4"
Electrical current requirement (lamp): 120 Volt AC, 60hz; 3 amp
Hopper design works with as little as 50 lbs of media.
Instructions
Click here for product instructions
Blast Cabinet Light Wire Connections:
WARNING! Attaching the wrong wires to the wrong switch lugs will burn out the circuitry in the fluorescent Lamp.
The BROWN wire spade connector MUST be attached to the switch lug adjacent to the pre-attached GRAY wire (this is the bottom switch lug).
The BLUE wire spade connector MUST be attached to the switch lug adjacent to the pre-attached BLUE wire (this is the upper switch lug).

Safety
Always wear eye protection and use with vacuum
Click here to see safety products
Warranty
Product Video
Customer Reviews
Questions & Answers
Customers also viewed:
-
Eastwood Dust Collection System for Blast CabinetsOnly $179.99
-
An affordable way to media blast parts without taking up much room in your shopOnly $159.99
-
100-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $139.99
-
Our largest, with 20-cfm gun and 12"x45" window, dust collectorOnly $2,299.99
-
24"x36"x24" interior size Dust Collector includedOnly $1,049.99
-
Large 27x60x35 with Dust CollectorOnly $1,899.99