Increase the capability of your motorized bead roller with these new optional dies.Capable of forming up to 18 gauge steel and 16 gauge aluminum the are designed to fit the Eastwood motorized bead roller as well as other motorized bead rollers with 3/4" shafts and 2.5" shaft spacing. These dies are NOT compatible with plate style bead rollers that have 22MM Shafts.
Item #
32555
BRAND: Eastwood
Eastwood Bead Roller Hem Roll Set Step 1
Brand:
Eastwood
In stock
SKU
32555
Initiate a Hemmed edge in your sheet metal project
- 1 year Warranty Included
- 90 Day Returns + 100% Satisfaction Guarantee
- FREE Lifetime Tech Support
QUESTIONS? Talk to an Expert: 800-343-9353 |
Chat |
Email Us
QUESTIONS? Talk to an Expert: 800-343-9353 |
Chat |
Email Us
Description
What's Included
(1) Male Hem Die (1) Female Hem Die (2) Counterbore Washers (1) Shim
Instructions & Guides
Link EW Manual
Safety Information
Wear work gloves and protective clothing. Sheet metal will often have sharp edges which can cause cuts to hands arms and face. Keep fingers and hands away from moving parts when operating.
specifications_ax
The first step to creating a hemmed Edge. Has an integrated guide to keep a consistent edge. Designed for Fabricated Motorized Bead Rollers with 3/4" Diameter Shafts and 2.5" Shaft spacing Works with up to 18 Ga Steel Works with up to 16 Ga Aluminum
*Note: Specifications are approximate and subject to change.
Unsure of a term? Look it up in our Glossary powered by The Garage
application_ax
N/A
What material are these dies made from?
The lower die used in step one of this three part process is made of a very hard plastic while the other five dies are machine steel.
Date published: 2021-10-23
Will these dies work on the 27 inch bead roller you sell with the motor unit you sell added to it?
These are designed to fit our larger motorized bead rollers with 3/4" shafts. The 27 inch has 22mm shafts.
Date published: 2021-10-23

Eastwood Bead Roller Hem Roll Set Step 1
Sale
$48.98
Reg.
$100.99
Save
$52.01
In Stock