Item #
21316
BRAND: Eastwood
Eastwood Sheet Metal Hole Punch and Flare Dimple Die Set
Create flares in sheet metal up to 1/8" thick
Create flares in sheet metal up to 1/8" thick
Eastwood Sheet Metal Hole Punch and Flare Dimple Die Set is rated
out of
5 by
11.
Create flares in sheet metal up to 1/8" thick
None Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Create flares in sheet metal up to 1/8" thick using the Eastwood Dimple Dies.
- Includes both Male and Female Dies
- Form clean 45° flares in up to 1/8” thick steel
- Made with high-strength Chrome Moly steel
- Machined to close tolerances
Simply drill the recommended hole size in the metal that you desire to dimple, then use a press to do the work. Made from heat treated Chrome Moly steel, these dies are built to last.
Specifications
Hole and Flare Size
| 1/2" Die - Requires 1/2" hole | Flare Width 0.7" |
| 1" Die - Requires 1" hole | Flare Width 1.4" |
| 1-1/2" Die - Requires 1-1/2" hole | Flare Width 2.15" |
| 2" Die - Requires 2" hole | Flare Width 2.85" |
| 2-1/2" Die - Requires 2-1/2" hole | Flare Width 3.5" |
Metal Flaring Capacity
| Mild Steel | 1/8” |
| Aluminum | 1/8” |
| Stainless Steel | 3/32” |
Tools Required (not included)
- A set of sharp, high-quality metal saws in sizes corresponding to those in the Die Set.
- A 20 Ton Hydraulic Shop Press or equivalent.
In the Box
Contents
- (1) Set of 1/2” Dies
- (1) Set of 1” Dies
- (1) Set of 1-1/2” Dies
- (1) Set of 2” Dies
- (1) Set of 2-1/2” Dies
Guides & Accessories
Instructions
Click here to download product instructions PDF
Safety Information
Always follow all manufactures safety procedures with the use of this type of equipment. Always read and fully understand the instruction manual before operating this type of equipment.
Accessories
Application Tips
Includes Both Male And Female Dies
Reviews
Rated 5 out of
5
by
RetireReady from
Nice tool
Heavy duty and seems to be well made for a reasonable price
Date published: 2021-07-30
Rated 5 out of
5
by
Travis from
Well Made
I purchased 5 sizes each one is made very well and work excellent.
Date published: 2019-02-08
Rated 5 out of
5
by
JunkMike from
Excelent value!
I have been wanting this type of tool for a while. I am so glad I discovered that Eastwood sold this!
Date published: 2019-01-10
Rated 5 out of
5
by
Jammer25 from
Quality tool
I purchased these for making decorative inner fender panels on my 1956 F100 truck. I made a sample panel with all the sizes so I had a better visualization of the sizes! They worked great!
Date published: 2018-11-30
Rated 5 out of
5
by
toxonix from
Nice finish, works great
I use these on a C-frame arbor press in 1/2" and 1". I've used them on aluminum and steel as thick as 16g. A properly sized hole saw or step drill is the best way to make a perfectly round hole. I use a step drill for anything up to 1", hole saws for larger holes. Do not try to use a twist drill, it will not leave a round hole in sheet metal. If you use any type of twist drill bit, the dimple will come out deformed no matter what you do.
Date published: 2018-09-12
Rated 5 out of
5
by
Stan from
Dimple Die
very good machining, highly poliched - quality product
Date published: 2018-09-03
Questions & Answers
Will these fit in an Ironworker hydraulic press?
This Eastwood Dimple Die set is designed to be used with a 20 Ton Hydraulic Shop Press or equivalent.
Date published: 2025-02-13
Using this set with 2024 T3 aluminum in .032 or .040", what press would you suggest?
We would still recommend utilizing a 20 ton Hydraulic Shop Press or equivalent.
Date published: 2019-02-10
Can you tell me the weight and dimensions?
These weigh a little less than 1lb and are about 2.17 x 4.53 x 4.75
Date published: 2019-01-12
Do these cut the center hole out as well? If not, what do you recommend using to get the cleanest cut?
We recommend using a hole saw with a cutting lubricant, letting the saw do the cutting, no excessive force.
Date published: 2019-05-17
I missed out on the last batch, when is the ETA for the next batch? Thanks!
The entire kit is still in stock. Only some of the individual sizes are out of stock. The three sizes which are currently out of stock are due in Early July.
Date published: 2018-06-04
Do these come in a case or loose?
These will come packaged in boxes with foam around them.
Date published: 2018-09-13
When is the estimated date to have this kit in stock?
The next batch is due in approximately the 23rd of March.
Date published: 2018-05-28
Eastwood Sheet Metal Hole Punch and Flare Dimple Die Set
$339.99
In Stock