Don't Miss Out On Today's Daily Deal!
  • Home
  • DeVilbiss Auto Paint and Priming System
DeVilbiss Auto Paint and Priming System is rated 4.5 out of 5 by 27.
Rated 5 out of 5 by from Pleased with the Purchase The kit arrived as promised. Opened to find exactly what was advertised. Used the gun to spray a door with epoxy primer after changing the tip assembly from 1.8 to 1.5. Removing the tip from the gun almost required a socket and a breaker because it was in so tight, did not think it needed to be that tight. Using an HVLP gun is very new to me as I had grown up using a pressure feed type sprayer. It took some time getting the spray pattern I wanted, but in the end I was pleased with the operation.
Date published: 2014-07-10
Rated 4 out of 5 by from OK guns If you buy these guns because it comes with a case, dont. you have to break down the gun completly so it fits back in, and after market cleaning brushes wont fit in it either. I use a craftsman cantelever box instead, and I can keep both guns fully assembled with room for all the extra goodys I need, tips, screens, brush's etc. The wrench they suplly doesnt work that well, you wil need extra wrenches. the big gun sprays awsome, the small gun sprays lean, but its prabably my fault. I'm no pro. I recomend buying a better quality single gun with 3 tips, and make your own carry case.
Date published: 2011-12-16
Rated 5 out of 5 by from Devilbiss is the best but : My grandfather was a very talented body man . I remember he would look down at me when he was at his cleaning station with his guns ,and he would say devilbiss is the best but you got to keep them clean . He was an artist . I did not get my grandpa's spray guns they were taken , i purchased these and right out of the box i noticed i inherited my grandpas talent with these spray guns . But you got to keep them clean . Good guns good service. Miss you grandpa
Date published: 2015-05-17
  • y_2017, m_7, d_19, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_12506, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Can i get this with plastic cups?

Asked by: Derail
There is not an option for plastic cups with this kit unless you purchase the dekups kit.
Answered by: S Church
Date published: 2017-04-01

DO YOU HAVE A PLASTIC CUP TO FIT THIS GUN? MY METAL CUPS CROSS THREAD AND LOCK UP AND ARE NOW COMPLETELY LOCKED UP TO THE POINT I CANNOT SCREW THE LID OFF.

Asked by: WYOMINGMAN
We do carry the Dekups disposable cup option for this gun:http://www.eastwood.com/dekups-34-oz-pro-starter-kit.html. It makes clean up a lot easier and faster!
Answered by: KHoffnagle
Date published: 2016-08-18

What DeKups system do I need for these guns?

Asked by: Bagarre
You will need DPC 81 adapter. Part number 12544
Answered by: S Church
Date published: 2017-05-10

It is safe to use with solvent and waterborne paint?

Asked by: Jim_shady
You can use both solvent & waterborne paints in these units..
Answered by: KHoffnagle
Date published: 2017-06-04

What are the guns made of stainless steel or aluminum nickel plated

Asked by: Jtoole
These are plated aluminum...
Answered by: KHoffnagle
Date published: 2017-06-03

My compressor states it has 15 SCFM @ 90 PSI. Is that sufficient for use with this gun?

Asked by: Lenny B
That should be fine. This product only requires 13 CFM at 30 PSI.
Answered by: JimH
Date published: 2016-06-30

I have a craftsman 26gal compressor. 8.6 @ 40psi  or 6.4@90psi. Do you think I can use the gun?

Asked by: STRUTYOURSTUFF
The spray guns in this kit require 13 CFM. Based on the specs you have given your compressor will not be able to operate these spray guns correctly.
Answered by: S Church
Date published: 2017-05-12

Can I purchase a 2.0 tip

Asked by: pump jock
Any additional tips would need to be purchased through devilibiss
Answered by: SeanA
Date published: 2017-01-27
  • y_2017, m_7, d_19, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_12506, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

DeVilbiss Auto Paint and Priming System

Item #12506

Includes 2 HVLP spray guns—
1 for priming, 1 for top-coating

In stock

Only $164.99

Sale $154.97

 

Details

All-in-one DeVilbiss® Auto Paint and Priming System includes 2 HVLP auto spray guns—one for priming and one for top-coating

  • Kit includes two 20-oz. aluminum cups, plus 1.3mm, 1.5mm and 1.8mm tips
  • Also includes air regulator and a complete set of brushes and wrenches for easy disassembly and clean-up
  • Requires 13 cfm at 30psi

This DeVilbiss HVLP 2-Gun Set is a great value from a brand name you know and trust. Complete, self-contained spray gun set includes not only one full-size HVLP spray gun but 2 for spraying primers, colors, clears, and sprayable body fillers.


More info...

About DeVilbiss Auto Paint and Priming System

The StartingLine by DeVilbiss Auto Painting and Priming System is a complete, self-contained gun kit to spray primers, colors, and clears. Includes two full-size DeVilbiss HVLP auto spray guns: one with a 1.3mm tip for color and clear coats, and another with a 1.8mm tip for primers and sprayable body fillers.

This paint equipment also includes a 1.5mm tip for "in-between" work, two 20-oz. aluminum cups, air regulator, plus cleaning brushes and wrench for easy disassembly and cleaning. Hard plastic molded storage case with handle. 1-yr. manufacturer's warranty.


Contents

Two DeVilbiss HVLP paint guns: one with a 1.3mm tip for color and clear coats, and another with a 1.8mm tip for primers and sprayable body fillers. Also includes a 1.5mm tip, two 20-oz. aluminum cups, air regulator, cleaning brushes and a wrench. Hard plastic molded storage case with handle. 1-yr. manufacturer's warranty.


Accessories

29953 34-oz. DeKups® Disposable-Cup Starter Kit. Save clean-up time while making it easier to use your DeVilbiss spray guns at any angle.


Safety

Always wear a NIOSH-approved respirator, eye protection and skin protection when painting. Consult paint labeling and MSDS for exact safety precautions. Always paint in a ventilated area away from open flames or sparks. Consult local and federal laws when disposing of excess paints, primer clears and solvents. To increase paint gun life, dissemble and clean the gun as soon as you are done painting.


Customer Reviews

Questions & Answers

Customers also viewed: