• Home
  • Eastwood Patina Preserver Aerosol
Eastwood Patina Preserver Aerosol is rated 3.3 out of 5 by 6.
Rated 4 out of 5 by from Works Great I have been using this to keep the patina on my vintage rusty tracker wheels and rusty parts that I want to last without making them look cheesy. It keeps the rusty patina and gives it a great finish without being too shinny. My only hope is that they keep the price down the cans don't seem to cover as much as you would expect
Date published: 2015-01-11
Rated 4 out of 5 by from easy to use looks good and easy to apply seams to last . used it last year still a little beading of water.
Date published: 2016-07-22
Rated 1 out of 5 by from It's ok! 100% invisible to the naked eye NOT TRUE!! My paint is flat satin ivory w/actual rust spots. After using "Patina Preserver" my paint & the rust spots are glossy all the sheet metal has a glossy finish! While it doesn't look bad , I'd rather have the natural flat look! But there is no way I'm going to go through the whole process of removing "patina Preserver" and redoing my whole paint job
Date published: 2016-01-14
Rated 5 out of 5 by from Seems like it does a good job. Never bought any preserver before, but item seems to do a good job. Just put it on the other day, had a couple rainy days, didn't wash off, still beads, hope it lasts because I will need more for other vehicles. Little pricey, but if it lasts for the time they say it will , should be worth the money. Would recommend the product as of right now, but time will tell.
Date published: 2015-04-12
Rated 2 out of 5 by from TOO GLOSSY! Description said "satin finish" not true left a gloss finish, really not happy with the finish AT ALL! Next time I will go to the hardware store and but satin clear lacquer, at least I know it will not be gloos
Date published: 2016-05-21
Rated 4 out of 5 by from Give it a try Bought to prevent rust. Applied to underbody of new car. We will see.
Date published: 2016-04-15
  • y_2017, m_2, d_20, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_14995Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

I have a 1979 cj7 golden eagle.. the golden eagle logo on the hood is original .. 38 years old.. can I use this product to go over the entire hood thereby protecting the logo?

Asked by: DmacNola
You can certainly apply this over an entire hood.
Answered by: S Church
Date published: 2017-01-21

What is the difference between this product and a rust encapsulator? What about the difference between this and Rust-oleum Satin Clear Enamel. Looking for the ingredients list.

Asked by: LPohlmeyer
This is a temporary coating to protect the current state of the surface you spray it on.
Answered by: S Church
Date published: 2016-10-18

How many cans required to cover a 1959 Ford F-100 with the three thin coats?

Asked by: gh14028
8-10 cans for an entire vehicle
Answered by: SeanA
Date published: 2015-06-18

Hello, How many cans should be required to thoroughly coat a 1967 Buick Skylark? Thanks.

Asked by: NZ 67 GS400
For doing the entire car you are looking at 6-8 cans
Answered by: SeanA
Date published: 2015-05-21

Can Patina Preserver be applied over existing clear coat to help slow down the spread of light to moderate sun damage (no rust or bare metal)? If so, do I wash and wax as usual after it has dried? I don't mind reapplying more frequently if needed. Thank

Asked by: peterb
Thanks, I'm going to buff/reclear; hoped to use it on other areas to avoid new damage. didn't know if it would adhere to original clear.
Answered by: peterb
Date published: 2015-10-28

Dear Sirs If using the Patina preserver, can i fisnish it with a clearcoat ?

Asked by: Vtech
No its a petrol based product and cannot be cleared over
Answered by: SeanA
Date published: 2015-03-05

I want the "flat rust look" to stay just the way it is. I'm worried you will beable to tell it's clear coated. Can you ensure me this product will not make the dull rusty patina "shiny"? Also, I saw where you said this will only protect for 1 year???

Asked by: MC51
The patina preserver will leave a coating that is invisible to the naked eye? so it will not look like the piece was clear coated. Depending on conditions the clear will only last for 12month.
Answered by: Ed O 88
Date published: 2015-03-03

What needs to be done to remove the product if you want to paint at a later date? Can it be removed without bothering the original paint? Does it matter if you have old fashioned enamel paint when you remove it?

Asked by: Phil47
All you would use to remove the product is a wax and grease remover which will not harm the paint already existing
Answered by: SeanA
Date published: 2015-01-08
  • y_2017, m_2, d_20, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_14995Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Patina Preserver Aerosol

Item #14995Z Brand: Eastwood

High-grade patina preserving coat prevents further discoloration and protects surfaces from corrosion

Details

Eastwood's high-grade Patina Preserver Aerosol protects the surface of your car and preserves that hot vintage look.

  • 1 can covers 12-16 square ft.
  • Spray coat is highly durable, UV and weather resistant
  • Prevents further rust

This high-quality, inexpensive Patina Preserver provides a clear protective coat on the body of your car that creates a safe barrier between your worn metals and natural elements. This spray-on preservative coat is 100% invisible to the naked eye, as it consists of Eastwood's exclusive micro-thin build, Nano Barrier Technology. This technology protects the surface of your car from further corroding, fading and tarnish, and it is compatible with such materials as aluminum, brass, copper, steel and more!


More info...

About Eastwood Patina Preserver Aerosol

The Eastwood Patina Preserver Aerosol is an inexpensive, long-lasting method for preserving your car's surface and limiting any additional wear and tear. This Patina Preserver will keep any vintage discoloration or fading exactly the way it is for a long time. If you have an old car you want to restore, this is the perfect product for you. The materials won't corrode any further and that classic look will remain exactly the same. The Patina Preserver Aerosol is ideal to use on entire vehicles, wheels, bumpers, interiors and just about any other metal surface you want to preserve.


Contents

14 ounces net weight


Accessories

10041ZS PRE Painting Prep, 43098L Nitrile Gloves, 14828 One Step respirator, 14792Z 2K AeroSpray matte Clear, 14791z 2K AeroSpray rat rod Black, 12196Z Chassis Kleen, 13791ZP Ceramic Engine Paint Kit


Safety

always wear eye, skin and respiratory protection when using this product. Apply in a well ventilated area away from open flame. Store in a cool dry place. Product has a 2 year shelf life. Consult MSDS for specific safety warnings.


Warranty

made in Canada


Application

Make sure surface to be preserved is clean and dry apply 2 to 3 light coats of Patina Preserver. Allow 5 minutes between each coat. Do not move part for at least 15 minutes, product is self leveling and movement may affect final coating. Full cure in 45 to 60 minutes. Clear protection lasts for approximately 12 months depending on conditions.


Customer Reviews

Questions & Answers

Customers also viewed: