Eastwood TIG 200 AC/DC Welder Versa-Cut 60 Plasma Cutter and Cart

Item #20030 TIG 200 ACDC Plasma 60 Cart

Eastwood TIG 200, Plasma Cutter 60 and Cart Kit
  1. Eastwood TIG200 AC/DC Welder
    Item #20565

    Only $749.99

    Sale $611.97

    In stock

  2. Eastwood Versa Cut 60 Plasma Cutter
    Item #14099

    Only $749.99

    Sale $649.97

    In stock

  3. Eastwood MIG TIG Plasma Welding Cart
    Item #11616

    Only $99.99

    Sale $89.97

    In stock



Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut 60 Plasma Cutter, and organize it all on the Cart included!

Click on the individual links below for all the specs, but you must click the "Buy Now" button below to get the special savings over individual prices!

Eastwood-engineered TIG 200 AC/DC Welder offers professional-quality TIG welding at an affordable price!
  • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
  • 1/4"-thick welding capacity
  • High-frequency start for precise arc control
  • Square-wave inverter for accurate aluminum welding
The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel and non-ferrous metals up to 7/8" thick.The Versa-Cut 60 requires a 50 amp breaker.
  • 220v AC input
  • 20' torch cable; 10' ground cable with clamp
  • Rated 60-amp output
  • Air flow rate: 5-7 CFM at 20-60 PSI
Our Multi-Unit Welding Cart is designed specifically to keep all your Eastwood welding and cutting equipment and accessories organized.
  • Top shelf holds the TIG-200 welder (or either of our MIG welders)
  • Bottom shelf holds the Versa-Cut 60 Plasma Cutter
  • Middle shelf is for accessory storage
  • Gas-bottle mount includes a TIG rod holder

Click here for welder warranty information

More info...

About Eastwood TIG 200 AC/DC Welder Versa-Cut 60 Plasma Cutter and Cart

TIG200 Welder - Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional machine. It has pre/post flow adjustment knobs to protect your weld and torch. If that's not enough, it even has a foot pedal to control amperage so you can get going quickly and not need to dial-in the machine for a specific material. Included is the TIG200, torch, ground cable/clamp, regulator/hose, and is powered through a NEMA50 plug.

Plasma Cutter -This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. Works with any standard home- or shop-type air compressor within a range of 20-60 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 220 volts AC, 60 amps. Duty cycle: 60% at 60 amps. Weighs less than 40 lbs., for easier portability.

Multi-Unit Cart - This welding cart was designed by to make storage, accessibility and maneuverability of your welder and cutter easier than ever before. This cart incorporates a top shelf which will hold our MIG135, MIG175 or TIG-200 welder. The bottom shelf will store your Versa-Cut Plasma Cutter, while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.

What is "Plasma Cutting"? - Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal work piece. That directed plasma stream (about 30,000° F) heats the work piece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.


TIG200 Unit
Shielding Gas Regulator
Shielding Gas Hose
Ground Cable with Clamp (10ft)
TIG Torch (17 Series) which accepts industry standard cups, collets, and collet bodies (14 ft.)
Foot Pedal for Amperage Control
110v-to-200v Adapter Plug
Hand Held Shield
#7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
Long Back Cap, Short Back Cap
3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
2.0mm Red (Thoriated Tungsten)

Versa-Cut 60 Plasma Cutter
Torch Assembly
Ground Clamp Assembly

Welding Cart
Assembly Instructions


13953 Tig consumable kit gets you started with the correct electrodes TIG Welding Cart
Auto-Darkening Welding Helmet
20458 TIG Finger Protection Kit
Welding Jacket
Large View Auto-Darkening Helmet
Welding Gloves


1/6-inch Collet Body
3/32-inch Collet Body
TIG Torch Rear Back Cap
3/8 Inch Diameter Ceramic Nozzle for TIG-200
7/16 Inch Diameter Ceramic Nozzle for TIG-200
1/16 Inch Diameter Torch Collet for TIG-200
3/32 Inch Diameter Torch Collet for TIG-200
1/16-inch by 36-inch 1 Pound Tube of ER70S-2 TIG Wire
3/32-inch by 36-inch 1 Pound Tube of ER70S-2 TIG Wire
1/16-inch by 36-inch 1 Pound Tube of 4043 Aluminum TIG Wire
3/32-inch by 36-inch 1 Pound Tube of 4043 Aluminum TIG Wire
1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
3/32 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
1/16 Inch E3(purple) TIG Tungsten
3/32 Inch E3 (purple) TIG Tungstenl
2 Pack Stainless Steel Scratch Brush


Click here for TIG 200 instructions

Click here for Versa-Cut 60 instructions

Click Here for Welding Cart instructions


Always follow welding and cutting safety procedures by wearing face, hand and arm protection. Always wear a minimum #10 shade helmet with TIG and #4 with Plasma Cutter.


Click here for Warranty Information

Customer Reviews

Questions & Answers