Daily Deal
Don't Miss Out On Today's Daily Deal!
  • Home
  • Eastwood No Weld Panel Repair Kit
Eastwood No Weld Panel Repair Kit is rated 4.4 out of 5 by 7.
Rated 3 out of 5 by from Rivets not included and you have to buy 500 Having to buy a 500 pack from EW leaves most DIYs with 400+ specialized rivets that will never be used. This is about 100 times worse than the hot dog - hot dog bun controversy. Steel countersunk rivets are not stocked by most hardware stores or Fastenal or Grainger. A bag of 100 would in most cases be overkill, since there are only 20 temporary rivets/clekos But having to buy 500 rivets from the company that sells a kit designed for 20 rivets is ridiculous. I recommend EW updates the kit to include a few dollars worth of steel countersunk rivets.
Date published: 2015-09-13
Rated 4 out of 5 by from Panel repair kit was OK. Used this kit to patch my pick up. Tools are good. I had an issue with the glue. I think the tube had been sitting for some time, (?)the white portion was a hard and I could not get the caulking gun to compress the tubes. Had to take cartridge out again 2/3 of the way thru. I lost part of the mix and poke it so mix would flow, but still was stiff and clogged again. I had to order more, the phone rep was obliging but with only a token discount on the replacement tube of epoxy. Tools and kit made these patches faster, visually better, and easy to get nice results.
Date published: 2015-07-12
Rated 5 out of 5 by from Great Product as it will come in very usefull I haven't used it yet but I have use simular stuff before so it shouldn't be a problem at all to do I just wish you didn't have to buy 500 rivits 200 or 300 would be good. And the other thing that would be nice to have in there kit would be more side holders as the kit only has 3 included with the kit and I'm just one person that will need more of them and you can buy 4 of them for $22.99 each so I would need about 10 of them to do one door pannel. So I might have to buy 2 more sets of them as I'm trying to do a old caars door pannel that is very big so I will need more off them. But I'm only gluing the top part of the door and not the sides of the door I got lucky on that one
Date published: 2016-05-27
  • y_2017, m_6, d_23, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_31102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

can this be used on replacement rocker panels

Asked by: jrh80
We would strongly recommend not doing so.. You would really need to weld this area.
Answered by: KHoffnagle
Date published: 2017-06-01

can I hang a full rear quarter on a mustang. is it strong so it don't crack the paint

Asked by: DMP1972
This kit is designed for patch repair and not entire panels.
Answered by: S Church
Date published: 2017-04-17

Is replacement adhesive available if needed?

Asked by: redshadow2012
Can't find that item # thru the website or their catalog
Answered by: redshadow2012
Date published: 2016-09-08

How long does the glue last or what is the self life of this product

Asked by: reggie1210
When properly stored this product has a two year shelf life.
Answered by: S Church
Date published: 2017-04-03

Other then the items that come in the kit what else would I need to buy

Asked by: Rdp493
As stated, you would need a standard caulk gun to use this kit as well...
Answered by: KHoffnagle
Date published: 2016-12-07

I dint see a rivet gun dose one come with the kit?

Asked by: Ben Jones
This kit does not include the Rivet gun.
Answered by: S Church
Date published: 2016-12-07

Can the rivets not be used? And do they need to be stainless steel?

Asked by: Danieldelpha80
The rivets help add much needed strength to the repair. The advantage to stainless is that they will never rust and potentially ruin a paint job over top.
Answered by: S Church
Date published: 2017-01-27

Can this product be used to "weld" an aluminum emblem to a steel tank?  Also, can this be used to "weld" a baffle inside of a gas tank?

Asked by: socko
You must connect similar metals or corrosion could result. I believe the baffle would be fine as long as the metal was all steel and steel rivets were used. 
Answered by: ande9974
Date published: 2015-08-24
  • y_2017, m_6, d_23, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_31102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood No Weld Panel Repair Kit

Item #31102 Brand: Eastwood

Flat surface requires little or no
filler; use your own caulking gun

In stock

Only $89.99



Install auto body patch panels easily without any welding.

  • Eliminates the need for a welder or welding skills
  • Flat repair surface requires little or no filler
  • Use your own caulking gun

This kit has the tools and materials to install patch panels securely without welding. Panels are flanged, then bonded with structural adhesive, and finally flush riveted. The result is a flat repaired surface requiring minimal filler. The panel adhesive will eliminate any corrosion at the joint.

More info...

About Eastwood No Weld Panel Repair Kit

With this economical and easy-to-use kit, you can carry out a wide variety of auto body repairs even if you don't have access to a welder. Panels are first flanged, then bonded with structural adhesive, and flush-riveted. The panel adhesive eliminates any corrosion at the joint. No-weld panel repair kit comes with everything except the caulk gun and rivets.



Dimpling Pliers
Flanging Pliers
Compression Pliers
(3) Side Grip Holders
(20) Blind Holders
Adhesive with 2 mixing nozzles
Adapter for use with your standard caulk gun (not included)
Complete instructions.

Requires 1/8" drill and rivets, a rivet gun and a standard caulking gun (not included).


Click here for product instructions


Read all instructions before starting.

Customer Reviews

Questions & Answers

Customers also viewed: