• Home
  • Eastwood Seam Sealer Cartridge Black
Eastwood Seam Sealer Cartridge Black is rated 4.6667 out of 5 by 18.
Rated 5 out of 5 by from Seam Sealer for that OEM look. I have used several tubes of this sealer so far, matching the OEM sealer applications. I ground out the original hard and dry sealers all over our project 67 Caddy. Pumped in beads (no more then 12" at a time) and fingered them down to match the original where applicable. Removed the original material between the inner and hood stiffeners and the skin and pumped it in the center holes just like the factory and it went in and came out the surrounding four holes just like the OEM process. The hood is now firm and quite, no tinny sounds when you tap on it and no swelling or bulges. Works perfectly, looks correct, sticks well and has the right firmness vs flex. Excellent product.
Date published: 2015-01-07
Rated 2 out of 5 by from Disappointed in Seam Sealer Unlike 3M seam sealer, this product went on very stringy and did not flow into/onto the seams. Used a small brush to help level the material and had hoped the seam sealer would level out smoothly and it did not. Will not use this product again. Although the 3M seld-leveling seam sealer is more expensive it would be well worth the extra money to invest a better product for better results.
Date published: 2015-01-26
Rated 5 out of 5 by from Excellent Stuff! I used it to seal seams on my 1957 Chevy Pickup cab. Goes on nice and gooey and works easily into cracks, stays flexible just like description says, overall I was very pleased. I have used a couple of Eastwood products now and am very pleased with the results!
Date published: 2013-03-19
Rated 5 out of 5 by from Try it you'll like it I used it on the floor plates I just installed in my pickup. Easy to apply even overhead and adheres very well. Other brands were just to expensive to try and silicone caulking is only good for a temporary fix. I'm happy I found seam sealer from Eastwood.
Date published: 2012-07-08
Rated 5 out of 5 by from Great seam sealer at a good price Used this for my inner cowl panel restoration on my 67 cougar. This sealer was easy to use and i will be purchasing more to re-do the factory seam sealer that is dry rotted. I recommend this sealer to anyone that is thinking about using it.
Date published: 2012-01-15
Rated 5 out of 5 by from Quick and simple Great grab at resent visit to the store. Just put a front clip on 99 civic cx. Made quick work of all seams. Went to paint just a few hours later, no problem with paint adhesion.
Date published: 2013-06-14
Rated 5 out of 5 by from Great product at a great price! This seam sealer was not only cheaper than the local auto parts store, it also applied the best out of all the brands I've tried. It made my race car project a little easier.
Date published: 2011-10-02
Rated 5 out of 5 by from good went on easy but it didn't smooth out with brush well. dried very hard but took longer than the 3m stuff. over all good product for budget minded DIY
Date published: 2013-04-19
  • 2015-04-25T10:48CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_51655Z, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Seam Sealer Cartridge Black

Item #51655Z Brand: Eastwood

Seals cracks, crevices and body seams, plus waterproofs and insulates

Details

Paintable Black Seam Sealer leaves a factory-like finish that won't harden or sag After stripping a car or repairing a panel, replace the seam sealer to protect your hard work from the elements.
  • Stays flexible; won't crack
  • Waterproofs and insulates
  • For firewalls, floor pans, trunk seams, fender extensions, taillight openings
  • Applies easily with your standard caulking gun

More info...

About Eastwood Seam Sealer Cartridge Black

After stripping a car or repairing a panel you should replace the seam sealer to protect your work from the elements. Eastwood's high-solids paintable Seam Sealer leaves a factory-like finish and will not crack, harden or sag. Seals cracks, crevices and body seams as well as waterproofs and insulates. It will adhere to paint and tack dries in 15 minutes and air dries in 1 hour. Remains flexible. Black in color. Can be painted in 60 minutes. Use on firewall and trunk seams, fender extensions, tail light openings, etc. Uses standard caulking gun.


Contents

10.6 oz net weight, 300mL


Accessories

10041Z PRE Painting Prep 31050 Flexible Caulk Strips 16006Z Cold Galvanize primer 16014Z Self Etching Primer


Safety

always wear eye, skin and respiratory protection when working with chemicals consult MSDS for proper safety warnings


Warranty

Made in Canada


Application

Clean surface with Eastwood's PRE painting prep (10041Z) Apply a bead using a brush or finger. Tack dries in 15 minutes Can edge feathered using a putty knife that has been treated with PRE Paintable in 60 minutes Clean excess with PRE


Customers also viewed: