Home /
Eastwood UNDERHOOD BLACK® Paint

Eastwood UNDERHOOD BLACK® Paint

Item #10024 underhood black

The perfect lacquer for a correct,
OEM-matching finish under the hood

Eastwood UNDERHOOD BLACK® Semi Gloss Aerosol 11 oz Item #10024Z $12.99 Buy 3 for $10.99 each and save 16%	- + Quantity: Quantity: In stock
Eastwood UNDERHOOD BLACK® Matte Aerosol 11 oz Item #12032Z Special Price $11.97 Regular Price: $12.99 Save: $1.02 Buy 3 for $10.99 each and save 9%	- + Quantity: Quantity: In stock
Eastwood UNDERHOOD BLACK® Semi Gloss Paint Quart Item #10045ZP $34.99 Buy 3 for $31.99 each and save 9%	- + Quantity: Quantity: In stock

Total $0

Details

Eastwood UNDERHOOD BLACK® is the perfect lacquer paint for the correct OEM-matching finish under the hood...choose semi-gloss or matte.

Restores OEM Low Gloss Finish
Protects From Rust and Corrosion
Fast Drying Formula
Perfect for Firewalls and Inner Fenders
15%-19% Gloss Level

UNDERHOOD BLACK® Semi-Gloss is just the right 15-19 percent semi-gloss finish for most radiator supports, inner fender walls, underhood brackets, and other under hood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet.

Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."

About Eastwood UNDERHOOD BLACK® Paint

UNDERHOOD BLACK® is the correct shade of black under hood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, under hood brackets and other parts. Black under hood paints from typical hardware stores are either too thick, too glossy, or the wrong color.

Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, under hood paint finish. Acrylic lacquer withstands up to 250° F and goes on thin for a smooth finish that doesn't hide surface details. Do not use with enamel primers. 10045ZP - Eastwood Underhood Black Quart paint is Spray Only. Do Not attempt to brush out

FAQs

Q. How do I apply this under hood paint?
A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator.

Safety

Use in a well-ventilated area or wear a respirator.

MSDS Sheet

Click Here for Material Safety Data Sheet

Accessories

Eastwood PRE Painting Prep
Paint Mixing Cups 1QT
Devilbiss Prep Wipes
Devilbiss Dekups 24oz
Masking Supplies
Eastwood Air Injected Cleaner
Eastwood Scuff Pads
Razor Blades

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov