ATK HP32C Chevy 350 Complete Engine 350HP
90 day Warranty Included
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • Lifetime Tech Support
Price for all checked items:
Product Overview:
Description
ATK HP32C Chevy 350 Complete Engine, or Stage 3 Engine, is designed for those that are wanting to drop the engine into their project and fire it up. We try to outfit the engine as completely as possible to save you time and headaches. A GM Complete Dress engine typically consists of the Stage 2 build out plus the following: Carburetion, Spark Plug Wires, & Spark Plugs.
Don't forget the engine paint!
Engine Specifications:
| HP | 350 |
| TQ | 400 |
| Block | OE roller block 4 bolt main 1pc seal 1996-2000 |
| Bore/Stroke | 4.040” x 3.480” |
| Displacement | 350CI |
| Crankshaft | OE Reground external balance rear of crank/internal balance front of the crank |
| Rods | OE powder metal 5.7” |
| Pistons | Hypereutectic 9.5:1 compression |
| Rings | Moly |
| Camshaft | Hyd. roller |
| Cam Specs | 220/224 @50 .495in/.502ex 112LSA |
| Timing Chain | Double roller |
| Cylinder Heads | Vortec cast iron 67cc 1.94/1.50 |
| Rocker Arms | Stamped steel 1.5 ratio |
| Oil Pan | Rear sump 5qt (not for Chevelles with steering behind crossmember, some corvettes and 62-67 chevy II’s) |
| Oil Pump | Melling STD Volume |
| Balancer | Internally balanced – PowerBond #PB1046-N |
| Flexplate/Flywheel | Externally balanced – Pioneer #FRA-159 |
| Intake Manifold | Edelbrock Performer RPM dual plane #7116 |
| Distributor | HEI (Iron Gear) |
| Water Pump | OE long pump |
| Carburetor | Quick Fuel 680CFM Vacuum secondary’s electric choke #HR-680 |
| Fuel Pump | Holley mechanical 110GPH #12-327-11 |
| Spark Plugs | Autolite #605 |
| Spark Plug Wires | 8mm |
ATK specializes in muscle. With the highest quality internal parts and Dyno Proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty.
Warranty
Specifications
| Oil | Conventional / Non Synthetic 10W30 |
| Oil Filter | Wix or K&N |
| Timing | 34-36 Degrees |
| Spark Plug Gap | .035” |
| Firing Order | 18436572 |
| Octane | 91+ |
| Stall Converter | Stock |
| Exhaust | 1 5/8 Headers |
| Weight | 430 lbs. |
Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.
Shipping & Handling
There is no core charge for this engine. You will not be required to send a core back to the manufacturer.
In the Box
Contents
Guides & Accessories
Reviews
Questions & Answers
Will this fit a 1993 Chevy g10 1/2 ton van
Will this fit my 1988 camaro v6
Hi folks, your crate motors look awesome. Would this complete Chevy 350hp fit into my 1965 Pontiac Lemans? I currently have a 1977 Pontiac 400 with a 350 turbo tranny installed but having issues with the motor
Well it fit in my 1999 Chevrolet Silverado 1500 2WD
Will this fit a 1983 Chevy Blazer and once the swap of the motors have been done do I need anything other than the liquids to drive
will this engine fit in 1979 corvette, without a lot of changes ?
Will this fit a 1976 pontiac grand lemans?
I have a 94 s10, and just blew the 4.3l vortec we had in it. What all do I need to fit this bad boy into it?
