• HP and Torque: 415 HP / 415 FT LBS
• Compression Ratio: 10.0:1
• Aluminum Heads
• Hydraulic Roller Cam
• Cast Steel Crank
• Forged Pistons

Block:

• Hand picked seasoned block
• Square and parallel decked
• Align honed main bearing bore
• Cylinders honed on computer controlled machine to within .0002 straightness and roundness
• Cylinders are sonic tested for thickness
• 2-Bolt Main
• 4.000" Bored .040" Over
• 1-Piece Rear Main Seal
• Mech fuel pump provision: Yes

Rotating Assembly:

• New BluePrint Cast steel crankshaft
• 3.400" Stroke
• Forged I-beam 5.400" connecting rods
• Forged pistons
• 28oz External balance

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads -HP9008
• 60cc chamber
• 2.02" intake/1.60" exhaust valves
• 190cc intake/65cc exhaust runners

Cam Specs:

• Cam Type: Roller
• .543 Intake .554 Exhaust
• 218 Intake / 226 Exhaust duration
• @ .050 - 112 degrees lobe separation

Ignition Timing

• 34 degreess Total at 3500 RPM

Notes

• Not for use in pollution controlled vehicles.
• Engine timing cover is designed for standard rotation water pump ONLY