Item # 30769 BRAND: Brakequip

BrakeQuip 3/16IN Copper Nickel Tubing 25ft

BrakeQuip 3/16IN Copper Nickel Tubing 25ft
BrakeQuip 3/16IN Copper Nickel Tubing 25ft
BrakeQuip 3/16IN Copper Nickel Tubing 25ft is rated 5.0 out of 5 by 8.
  • y_2024, m_2, d_21, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_6
  • loc_en_US, sid_30769, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 5.94ms
  • REVIEWS, PRODUCT
$66.99
Loading...
Loading...
Save for Later
BrakeQuip 3/16IN Copper Nickel Tubing 25ft

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • Lifetime Tech Support
BrakeQuip 3/16IN Copper Nickel Tubing 25ft

Product Overview:

Description

Copper nickel tubing meets the definitive SAE J1047 standard. It's approved for automotive use including brake lines. This tubing is a breeze to work with and can be bent by hand. Cunifer (copper-nickel-iron alloy) does not work-harden the way that copper tubing does. This tubing is the same size and operates using the exact same hardware as your existing lines. If you want to reuse your old nuts and fittings you can.
  • Does not rust or corrode
  • Very easy to bend and flare
  • Able to bend tube by hand on the vehicle
  • Polishes to a brilliant finish
  • Does not work-harden the way copper tubing does
  • Exceeds international standards
  • Original equipment on luxury European vehicles
  • Long term safety benefits
  • 0.028 Wall Thickness
  • Made in the USA

In the Box

Contents

Contains one 25 foot roll of 3/16 tubing

Guides & Accessories

Safety Information

Always wear proper safety equipment when performing brake service to an automobile. Always consult the vehicles owners manual for the proper brake fluid to use.

Reviews

Rated 5 out of 5 by from Brake Tubing The BrakeQuip tubing worked as expected. Easy to bend and flare.
Date published: 2021-12-27
Rated 5 out of 5 by from Best brake line. I used this for all the brake lines in a new Lotus restoration. Easy to bend, easy to flare and pretty too. Excellent.
Date published: 2018-09-05
Rated 5 out of 5 by from great to work with I used this to fabricate a line from a slave cylinder to the hyd. throw out bearing on my street rod. It was very easy to bend, super easy to 37 degree flare, and polished easily to a mirror shine with a slight copper tint to it when polished. Definitely worth the extra cost with ease of handling and finished appearance. It looks so good, that I am going to fabricate and replace the stainless brake lines from the master cylinder to the proportioning valve on the car with this line and polish it as well.
Date published: 2018-01-25
Rated 5 out of 5 by from Worked well, bends easy, flares easy I used this to run all the brake lines on my project car. It worked really well. Cut, debured and flared very well. Easy to bend/shape. A little pricey though.
Date published: 2017-12-30
Rated 5 out of 5 by from Great Material I bought the brake line material to replace the main line on a vehicle I am restoring. Easy to work with.
Date published: 2015-07-05
Rated 5 out of 5 by from This stuff is great!!! I build hot rods and classic cars as a retirement hobby. I have pretty much all the best tools for installing brake lines. With this product I could probably throw away most of my benders. It is so easy to bend the line by hand without kinking. And it flares easier than steel too. Although it is a lot more expensive, you make up the cost by the ease of use.
Date published: 2015-05-05
  • y_2024, m_2, d_21, h_11
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_6
  • loc_en_US, sid_30769, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.56ms
  • REVIEWS, PRODUCT

Questions & Answers

I am using an fittings on my hyd. throw out bearing. Will this tubing flare easily to a 37 degree flare and will it seal and hold the pressure necessary for this application? When polished, what is the appearance? Does it look like polished copper?

Asked by: Donz
This can certainly be flared with a 37 degree flare and hold pressures found in an automotive system. We have never tried polishing this material to see what happens.
Answered by: Scott C
Date published: 2021-01-15

Will this brake line tubing work with stainless steel fittings?

Asked by: Sammy88
Yes the tubing will work with SS fittings
Answered by: SeanA
Date published: 2021-01-15
  • y_2024, m_2, d_21, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_30769, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 6.42ms
  • QUESTIONS, PRODUCT
Glossary
Unsure of a term? Look it up on our Glossary powered by The Garage
We found other products you might like!
BrakeQuip 3/16IN Copper Nickel Tubing 25ft
$66.99
In Stock