Cyclone PT-100SK Direct Pressure Sandblaster
Add more power to your sandblasting system with this Cyclone blast cabinet add-on. Sandblasting pots are the best way to clean parts that are too unwieldy to put in a cabinet or require especially high pressure. This particular model is designed to integrate with your existing gravity-fed Cyclone sandblast cabinet. It runs off the same air supply to give you the best of both worlds. You can also attach a 23 CFM air compressor directly to the high-pressure blaster.
Thanks to the Cyclone Side Kick Sandblasting Pot, cleaning exterior sheet metal and muscle car frames is just as easy as finishing a valve cover. It has many of the same features as the original PT-100 pressure blaster, including an ASME-certified steel tank, 10-foot blast hose and 6-inch solid rubber wheels. Eastwood has a 100% customer satisfaction guarantee and lifetime tech support via phone, email or live chat.
Flexible Abrasive Media Choices
This pressure pot sandblaster can handle abrasives like white or brown aluminum oxide, glass beads, silicon carbide, or blasting garnet. We do not recommend steel shot and under no circumstances should you ever use sand in an abrasive cabinet.
Click here for product instructions
Under no circumstances should you ever use sand in an abrasive cabinet – even with a name like sand blaster. Silicosis is a deadly condition caused by silica in sand. When breathed, it will damage your lungs and eventually result in death.
WARNING: This is constructed from steel. In accordance with proposition 65 we are complying by indicating that steel has been known to contain Nickel. Nickel is a chemical known to the State of California to cause cancer. For more information go to http://www.P65Warnings.ca.gov
To get $10 OFF your order!