Super durable engine paint enamel withstands 650 degrees F
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
Warranty Included
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
Eastwood sets the standard in high temp engine paints!
Super durable
Protects engine and resists chips, chemicals and heat
Withstands temperatures up to 650 F
Provides a beautiful factory-look finish
Easy to apply – brush or spray on (for best results metallic’s should be sprayed)
One quart covers approx. 40 square feet
For added durability and gloss use Eastwood's activator 21854Z
Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F. Developed using the latest paint technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. Our Paint technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.
To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS
Rated 5 out of
5 by
gdavis01 from
Use the bestThis expensive paint but worth every penny. I used their exhaust paint on my manifolds and it lasted forever they have great products.
Date published: 2024-09-24
Rated 5 out of
5 by
Kevin from
Sprays easy and looks greatCovered great with two medium coats sprayed at very low pressure (4-5 psi). The result was a very shiny and smooth finish.
Date published: 2022-09-12
Rated 5 out of
5 by
Harry the yank from
Ford hi-temp engine paintWith the catalyst it dries very quickly. Also the catalyst gives the paint a nice gloss.
800-343-9353 
Chat 
