Item #
51634Zp Universal Red Engine Paint
BRAND: Eastwood
Eastwood Ceramic Engine Paint Universal Red Quart
Super durable engine paint
enamel withstands 650 degrees F
enamel withstands 650 degrees F
Super durable engine paint
enamel withstands 650 degrees F
enamel withstands 650 degrees F
Eastwood Ceramic Engine Paint Universal Red Quart is rated
out of
5 by
3.
Super durable engine paint
enamel withstands 650 degrees F
enamel withstands 650 degrees F
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Product Overview:
Description
Eastwood sets the standard in high temp engine paints!
Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F. Developed using the latest paint technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. Our Paint technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.
- Super durable
- Protects engine and resists chips, chemicals and heat
- Withstands temperatures up to 650 F
- Provides a beautiful factory-look finish
- Easy to apply – brush or spray on (for best results metallic’s should be sprayed)
- One quart covers approx. 40 square feet
- For added durability and gloss use Eastwood's activator 21854Z
Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F. Developed using the latest paint technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. Our Paint technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS
Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.
Warranty
In the Box
Contents
Guides & Accessories
Instructions
Click here for product information sheet
Safety Information
Application Tips
To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS
Reviews
Rated 5 out of
5
by
Rich B from
IH Scout red
Great product. Used this on my International Scout engine and it turned out beautiful. Applied by brush when the metal was warm from the sun and it flowed out like it was applied by spray. With brush application all you need is one coat since it goes on thicker and there is no waste from overspray. Engine looks better than from the factory!
Date published: 2023-08-30
Rated 2 out of
5
by
Travis from
Color isn’t right!
I bought this thinking it would be red but it’s not I wish I would have taken a picture of it before I sand blasted it off but I didn’t as for durability it is good it took some pretty good amount of sand blasting to get it back off with two coats of epoxy primer under it. I just want anyone looking at this to know if you are looking for bright red this isn’t what you want it’s more of an old international tractor red.
Date published: 2023-05-06
Questions & Answers
Is it possible to get a color sample of the red engine paint?
Unfortunately we do not have samples. The only ways to view these engine paints currently are online or at any of our Retail locations if in stock.
Date published: 2022-07-22
Can I add metal flakes (part #15381) to this paint and spray it on? and put the exo armour on top with spray gun or could I put flakes in the exo armour on top of this red?
We do not mixing metallic flakes in either the engine paint or the clear coat.
Date published: 2022-03-02
Eastwood Ceramic Engine Paint Universal Red Quart
Starting at$84.98
In Stock