Item # 50300ZP BRAND: Eastwood

Eastwood Low VOC Gray Urethane Primer and Activator

Low VOC Formula
Low VOC Formula
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 81.78ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Low VOC Formula
  • 90-Day Returns
  • Technical Support
Eastwood Low VOC Gray Urethane Primer and Activator
Customize Eastwood Low VOC Gray Urethane Primer and Activator

* Required Fields

Your Customization
Eastwood Low VOC Gray Urethane Primer and Activator
Eastwood Low VOC Gray Urethane Primer and Activator

$145.98

$145.98

Save for Later
Save for Later
Summary

    In stock

    Description

    Eastwood Urethane gray primer is a two component gray surfaced designed for overall jobs.

    • Designed for overall jobs
    • Excellent color holdout for all top coats
    • Sandable - Light Filling
    • Apply over- body fillers, existing finishes
    • Approximate Coverage Per Gallon: 140 SQ FT

    It fills well, sands easily and provides excellent color holdout for all top coats. Mixes 4:1 with catalyst. May be applied over Eastwood's Epoxy primers, old paint, body filler. Ideal for block sanding in 3-4 hrs after application. Low VOC 2.1 lbs per gallon.

    Contents

    Apply Over Body Fillers, Existing Finishes

    Accessories

    Eastwood 2.1 Low VOC Gray Sandable Light Filling Urethane 2K Primer Gallon

    Application Tips

    Designed For Overall Jobs

    Safety Information

    Use in well ventilated area always wear eye, skin and respiratory protection consult MSDS and Product data Sheet for specific safety instructions.

    Customer Reviews

    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 25.54ms
    • REVIEWS, PRODUCT
    • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

    Questions & Answers

    Do you have a clear that can be used over your primer

    Asked by: Mike3
    Technically any of our Urethane based clears like our 2:1 Urethane can be applied over this: https://www.eastwood.com/eastwood-2-1-urethane-clear-gallon-and-activators.html
    Answered by: Kelly H
    Date published: 2021-09-29

    Can this Urethane primer be spayed over your Encapsulator (16065zp) and then top coated with a Single stage Urethane paint.

    Asked by: Bob76
    Yes, this process would be no issues at all.
    Answered by: Kelly H
    Date published: 2021-07-25

    This is for use in Ca, my vehicle is mostly bare metal with a few body filler areas. What do you recommend to prime my vehicle that is voc compliant for Ca?

    Asked by: Mustang 68
    I ordered epoxy primer from Eastwood i was told not legal in Ca. What else you got?
    Answered by: Mustang 68
    Date published: 2021-02-14

    Can this be used a sealer prior to basecoat? If yes, are there any other steps to do (i.e. additional % reducer)?

    Asked by: Paul
    Technically yes. You would activate at the recommended ratio then reduce by 20% with any of our Urethane reducers.
    Answered by: Kelly H
    Date published: 2021-05-22

    I will have some small areas of bare metal and most areas with old paint that will be cleaned and sanded. Is there a primer that can manage both or do i need to try and cover all the bare metal areas separately then use a primer like this over top?

    Asked by: FredHill
    Since you have multiple areas of bare metal by the sounds of it we would highly recommend a coat of Epoxy primer first to seal the area.
    Answered by: Scott C
    Date published: 2020-05-06

    After rubbing the existing surface with a lacquer thinner soaked rag it appears that the paint used in the late 70’s was a acrylic lacquer.   Would this primer be suitable to go over this paint after scuffing with 320 or should it go down to bare metal?

    Asked by: NDSioux
    Yes, this primer should be fine to apply over the top of this existing finish as long as it is properly scuffed up first.
    Answered by: Kelly H
    Date published: 2020-04-29

    its going to be more than a week between priming & painting. I'm waiting for your paint chart to choose a paint. Will there be a problem with that length of time between priming with your low voc urethane and painting?

    Asked by: moxiepop
    With that amount of time, you are going to scuff the primer down to get good adhesion for the paint to stick.
    Answered by: SeanW
    Date published: 2019-07-18

    Can your 2k urethane high build primer be seal with nason Acrylic sealer

    Asked by: Bubba
    We can only guarantee compatibility with what we sell. We would recommend using our Epoxy primer reduced by 20% with Urethane reducer and applying this as your sealer coat. Anytime you intermix brands you run a much higher risk of a compatibility issue.
    Answered by: Kelly H
    Date published: 2019-04-02
    • y_2021, m_10, d_15, h_18CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_12
    • loc_en_US, sid_50300ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_eastwood
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 58.35ms
    • QUESTIONS, PRODUCT
    Eastwood Low VOC Gray Urethane Primer and Activator
    $145.98
    In Stock