Eastwood Textured Underhood Black Aerosol

Item #54251Z Brand:Eastwood

Made in the USA
Eastwood Textured Underhood Black Aerosol
Create a custom textured finish under your hood
- +
Quantity: close

In stock



Are you working on a resto mod or just looking for a way to make under your hood different than all the others? The wait is over.

  • Creates A Custom Textured Finish
  • Fast Drying Formula
  • Perfect For:
    • Firewalls
    • Inner Fender Wells
    • Under Hood Accessories
  • Made in the USA

Coat your under hood components in Eastwood Textured Underhood Black for that one of a kind look. Formulated from our original underhood black you can be reassured that this coating will last for years to some.


(1) 11 Ounce Aerosol Can


Color: Black
Finish: Texture
Gloss Level: Matte


Pre-Treatment: Clean area to be painted with Eastwood PRE Painting Prep (10041Z). Surface must be rust-free and dry prior to painting. For best results, prime with Eastwood Gray Self-Etching Primer (16114Z) or Epoxy Primer (14790Z), before top coating with Textured Underhood Black. DO NOT use with enamel primers.

Mixing: Shake can Vigorously for at least one minute before use with occasionally during use.

Spray Passes: Apply two medium coats. Aproximate can coverage is 6 sq. ft. For best results, use between 70-90 degrees F (21-32 degrees C).

Spray Distance: Keep nozzle 8-10 inches from substrate.

Drying Time: Allow 1-2 hours in between coats. Allow 24 hours for full cure.

Storage: After painting turn can upside down and spray for two seconds to clear nozzle of paint, Discard empty can in trash, do not incinerate or compact.


Always wear proper personal safety equipment and work in a well ventilated area when using this type of product.

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Customer Reviews

Questions & Answers