- Eastwood Tungsten Grinder
Eastwood Tungsten Grinder
Eastwood Tungsten Grinder
Works with 1/16” and 3/32” tungsten’s
Mark Winchester, Winchester Metal Works
“ A good weld starts with good tungsten prep “
Why Buy This Tool? A Sharp Tungsten Will:
- Increase arc control
- Increase arc stability
- Eliminate porosity with contaminated tungsten electrodes
- Eliminate arc wander on outside corners
- Create better looking, stronger and better penetrating welds with consistent and accurate tungsten prepared points
This Eastwood Tungsten Grinder features a long-lasting, double-sided, Diamond Grinding Wheel capable of providing over 200 tungsten sharpening’s before requiring replacement.
The new Eastwood Tungsten Grinder eliminates getting out of position to go to your bench grinder. The small handheld unit is right by your side. The Eastwood tungsten grinder also has engineered “slots” that are designed to hold both 1/16” and 3/32” tungsten to 10 degree and 22.5 degree angles for re-sharpening, assuring the perfect point every time! Simply remove the tungsten, place in the design slots and sharpen- it’s that easy.
Must Have Tool If You Own A TIG Welder
If you own a TIG welder you need this tool. Increase arc control, increase arc stability, eliminate porosity with contaminated tungsten electrodes, eliminate arc wander on outside corners, create better looking, stronger and better penetrating welds with consistent and accurate tungsten prepared points
Easy to use and sharpens over 200 Tungstens
- Works with all color tungsten’s
- Works with 1/16” and 3/32” tungsten’s
- Designed to create the optimum rpm for the diamond sharpening wheel
- Diamond wheel is double sided for long life
- Sharpen over 200 tungsten’s (100 each side)
Save Time and Money
This convenient tool will save you a lot of time. You will no longer need to stop your welding project to get up and go to your bench grinder to sharpen your tungsten. Now you have the tungsten sharpener right there at the job, and time is money.
Pro Fabricator & TIG Welder Review
“I was really impressed with the ease of use and how portable it was, getting it in and out of the roll cage. The consistency of the grinds - all the tips looked great and because of that the arc stability is unmatched by other tungsten grinders or using a bench grinder” – Matt Rad
(1) Tungsten Grinder with two-sided Diamond Grinding Wheel installed
Input Voltage: 120 VAC, 60 Hz
Motor: 1.5 Amp Plug type: 2-prong, polarized
No-Load Speed: 0-35,000 RPM (Variable Speed)
Diamond Wheel Diameter: Approximately 1”
Sharpens Tungsten Sizes: 1/16" and 3/32"
Head not sold separately for use on other tools including a Dremel®
READ INSTRUCTIONS! Thoroughly read and understand the product instructions before using this tool. Failure to follow all warnings can result in tool damage or physical injury.
Keep these product instructions for future reference.
1 Year Warranty
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov