Do the job right
800-343-9353

Home
Evercoat Lite Weight Body Filler Gallon

Evercoat Lite Weight Body Filler Gallon is rated 4.7 out of 5 by 7.

Rated 5 out of 5 by Tom64 from Sands well I'm comparing this to Bondo. Evercoat sands a little more easily, cures faster, and clogs the paper far less (very slight clogging if you really get into it, but nothing like Bondo). I'm using 80 grit paper. I'll never use Bondo again.

Date published: 2015-09-10

Rated 5 out of 5 by Daddy Rick from "Non Clog" The inscription "non Clog" caught my attention. Most fillers once dry and ready to sand, leave a "grease coat" that sticks to the sand paper for the first few strokes. Ruins the sheet and it must be changed. This Evercoat doesn't do that!! That's HUGE imo. For only a couple dollars more, one saves the cost of the extra sandpaper AND the aggravation of having to stop to reload the sander. I HIGHLY recommend the Evercoat over ANY other I've tried.

Date published: 2015-07-07

Rated 5 out of 5 by Steve r from Evercoat light weight body filler Ease of use sands very well but it does clogg a little . Will use this from now on . Fast service

Date published: 2015-01-22

Evercoat Lite Weight Body Filler Gallon Reviews - page 2

got a '06 chevy colorado with some exterior roof damage, would this work? I have never seen a truck roof like this. clear coat, paint, primer, then a foam type insulation, then a 1/8" sheet metal.

Asked by: WolfEagle80120

This would perfect for roof repair.

Answered by: Scott C

Date published: 2017-11-30

Can I use this on galvanized metal, straight onto it, or with rust converter, or with a spray primer for metal:Rust-X, Rustoleum? It's an in-ground soaking tub with some rust that I want to end up top-coating with swimming pool paint. IT HAS A LOW SPOT

Asked by: nmchick52

Yes this filler will adhere fine to galvanized metal. We would not recommend applying them over either Rust-x or Rustoleum.

Answered by: KHoffnagle

Date published: 2017-07-26

Would this filler be good on a motorcycle plastic or fiberglass faring, where flexing would probably be happening ??

Asked by: iggymon

A better filler in this case would be Bumper Bite.

Answered by: S Church

Date published: 2017-01-27

I have a 32 ford fiberglass coupe. It has steel flat bars inbedded in resin on the floor for extra strength. I want to smooth the floor completely. What product should I buy to fill in the gaps( Large area)? I want extremely light weight and easy to use.

Asked by: Dave979

For larger jobs requiring more filling you will not be able to use a lightweight filler. You'll need to use a fiberglass reinforced filler like Everglass http://www.eastwood.com/evercoat-everglass-filler-gallon.html Make sure to follow the guidelines for application thickness, etc. Over the fiberglass filler you'll be able to use a lightweight filler to finalize the smooth surface.

Answered by: MikeL

Date published: 2018-12-19

Evercoat Lite Weight Body Filler Gallon

Item #12713ZP Brand: EverCoat

Evercoat's best-selling body filler:
smooth spreading, easy sanding

Qty:

Quantity:

In stock

Only $24.99

Add to Wishlist

Evercoat's #1 selling, high-quality, clog-free, lighweight body filler is a great value with its smooth spreading, easy sanding features. Non-clog formula makes sand papers last long. Blue cream hardener included.

Details

Evercoat's #1 selling, high-quality, clog-free, lightweight body filler is a great value with its smooth spreading, easy sanding features. Non-clog formula makes sand papers last long. Blue cream hardener included.

More info...