Eastwood garage - How To 
Email Sign-up
- Home
- Hotcoat Powder Coat Translucent Grape
Hotcoat Powder Coat Translucent Grape
Hotcoat Powder Coat Translucent Grape
Item #10154 Translucent Grape
Details
A deep glossy candy grape finish when applied over chrome, polished or chrome powdered parts. Do The Job Right with Eastwood Powders!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Note: split images - right side is over chrome, polished metal, Argent Silver Base Coat, or Reflective Chrome, left side is over bare metal, 10303 Rally Wheel Silver, and 51082 OEM Wheel Sparkle Silver.
Contents
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Specifications
Color: Translucent Grape
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
Safety
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Warranty
Eastwood 100% satisfaction guarantee
Application
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Customer Reviews
Questions & Answers
Customers also viewed:
-
A deep medium Purple high gloss finish with fine metallic sparkle flakes.Starting at: $15.99
-
Create a custom candy violet finish over polished metals or chrome powders.Starting at: $15.99
