Create a one-of-a-kind custom candy finish with Eastwood Translucent Mahogany Powder!
- Cure Time: 20 Minutes @ 400°F (actual surface temperature)
- 100% Virgin Powder
- Gloss Level: High - 80%+ at 60 Degrees
- Powder Type: Polyester TGIC
- Storage: <80°F, well ventilated, <60% humidity
- Durable enough for under hood applications and heat resistant up to 250 degrees F
About HotCoat Powder Coat Translucent Mahogany
All Eastwood powders are virgin TGIC Chemistry and packaged in air tight reusable plastic containers. This polyester powder is cured at 400 degrees F for 20 minutes. One 8 oz bottle covers 10 to 20 sq. ft.
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
19415ZP Fast Etch Quart,
12725zp Powder Stripper Quart,
12582ZP Anodize remover Quart,
10421 High Temp Tape Kit,
13266 Magnetic Masking Discs,
58112 250pc Cap & Plug Kit,
10288z High Temp Lab Metal,
10590 two head curing lamp
Always wear eye, skin and respiratory protection when powder coating. Do not cure in an oven that will cook food. Use in a well ventilated area. Do not use a house hold vacuum or shop vac to clean up powder, the electric motor could spark and ignite the powder.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov