Painless 1986-1995 Ford 5.0L Harness Standard Length

Item #32376

Made in the USA
Painless 1986-1995 Ford 5.0L Harness Standard Length
Ford 1986 - 1995 5.0L Fuel Injection Wiring Harness - 60510
- +
Quantity: close


This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.

This harness is designed for the 1986-1995 Ford 5.0 car HO EFI engines. You must use the 1989-1993 MAF, Distributor, and ECM. 1986-1988 must add MAF (mass air flow) sensor. 1994-1995 must modify TPS wiring and change distributor. Harnesses do not include all the original connections for the original emissions. Included with this harness is an 8 circuit modular fuse block and Ford color coded wires with labels for easy installation.

This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.

This kit includes:

  1. All new fuel injection harness with OEM fitment connectors and harness breakouts
  2. Diagnostic connector and check engine light
  3. Rubber grommet
  4. Mounting hardware

We recommend checking the online manual for the full list of required mating parts prior to ordering.


(1) Painless 1986-1995 Ford 5.0L Harness Standard Length



Part Number: 60510
Year: 1986 - 1995
Make: Ford
Model: Passenger Car
Engine: 5.0 H.O. Mass Air flow
Trans.: None

Number of Circuits: 8 Fuses with 2 Ignition & 1 Fuel Pump Relay
Harness Length: 4 Feet Between Engine and ECM
Fuse Type: Blade
Firewall Pass through: Grommet
Color Code Based: 1990 Mustang
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

The Fuse Block Protects The Following Circuits:

• Check Engine Light • Driver Side Injectors • Dual 40 amp Ignition Relays • EEC-IV • Fuel Pump Relay (B+) • Fuel Pump Relay (IGN) • Heated O2 Sensors • Mass Airflow, EVR, ISC • Pass Side Injectors

This harness includes connections for the following components:

• Barometric Pressure Sensor
• Data Link Connector
• EEC Ground
• EEC Power Relay
• EEC Test
• EGR Vacuum Regulator
• EGR Valve
• Engine Coolant Temperature
• Fuel Pump
• Fuel Pump Relay
• Grounds
• Idle Air Control
• Ignition Coil
• Ignition Switch Signal
• Ignition Timing Setting
• Injectors
• Intake Air Temperature
• Malfunction Indicator Lamp
• Mass Airflow Sensor
• Neutral Safety Switch
• O2 Sensor
• Starter Relay
• TFI Ground
• TFI Pigtail
• Throttle Position Sensor


1 Year Manufacturers Warranty

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm -


Customer Reviews

Questions & Answers