COVID-19 UPDATE: We’re here for you and shipping fast, prioritizing health and safety first. Learn More

POR15 Gray Self Etching Primer Aerosol

Item #22078Z Brand:POR-15

POR15 Gray Self Etching Primer Aerosol
Adheres to Metal and Painted Surfaces
*
$30.58
- +
Quantity:
Quantity: close

In stock

payment-icons
OR
< Back

Details

With POR-15 Self Etch Primer, you can even topcoat POR-15 Rust Preventive Coating that's been in place for months or years.

POR-15 Self Etch Primer is NOT a high-build primer like POR-15 High Build Primer, but it can be sprayed on almost any painted surface and can be top coated in 20 - 30 minutes. It bonds incredibly well to POR-15 Rust Preventive Coating, and all topcoats bond incredibly well to POR-15 Self Etch Primer. It can be sanded lightly, and if desired, multiple coats may be applied.

In situations where you are topcoating a very old POR-15 Rust Preventive Coating finish, we first recommend a light sanding with any 280 to 320 grit paper.


More info...

Contents

(1) 15oz Aerosol Spray


Specifications

Zinc Enriched Rust Protection. Water Resistant After 15 minutes. Resists Sagging and Settling. Topcoat in 30 Minutes. Professional Use Only.


Instructions

Surface Preparation:


For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion.


Previously Painted Areas: Scuff surface with 320 grit sand paper. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep. Let surface dry thoroughly.


Bare Steel or Aluminum: Clean and prep surface then let dry thoroughly.



Application:


Shake can well before spraying. Spray two light coats of POR-15 Self Etch Primer and allow 10 to 15 minutes between coats. POR-15 Self Etch Primer can be topcoated in 30 minutes. It is not necessary to sand POR-15 Self Etch Primer before topcoating.


Dry time: It cures to touch in 30-60 minutes. Second coat can be applied in 10-15 minutes, depending on ambient temperature and humidity.


Cleanup: To prevent clogs in spray nozzle, hold can upside down and spray until clear gas appears.


Empty aerosol cans are recyclable or may be discarded in regular trash pick-up. Do not incinerate or compact.


Safety

Always wear proper personal safety equipment when using this product. Always use in a well ventilated area.


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm -
www.P65Warnings.ca.gov






Customer Reviews

Questions & Answers