Unique swivel-head design lets you work from almost any angle
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
Add an Eastwood Service Plan for additional protection?
*Not all shipping states are eligible for Eastwood Service Plan coverage. You will be prompted during checkout if your selected shipping state is ineligible.
90 day Warranty Included
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
The Rockwood Air Punch and Flange Tool helps make quick work of seamless repairs by flanging and punching, utilizing the power of compressed air.
Produces 0.063” offset flanges
Makes perfectly clean 0.19”-diameter holes
Works on 16 Gauge Mild Steel / 18 Gauge Stainless Steel
Requires only 4 CFM @ 90 PSI
One side of the double-action head produces 0.063” offset flanges on 16-gauge metal or thinner for flush seams when joining panels. The other side produces perfectly clean 0.19”-diameter holes that are ideal for plug welding. Unique swivel-head design lets you work from almost any angle.
Always read the tools instructions before use. Always wear proper safety equipment while using using this tool. Always follow the proper safety precautions while using this tool.
Rated 5 out of
5 by
Davisele from
Great tool additionIts a very clean offset. The hole punch is cleaner & faster than drilling.
Date published: 2023-04-23
Rated 5 out of
5 by
Tim R from
lets make it fast and easyWorks great just wish the hole was bigger it would make it easier to mig weld it like spot welds
Date published: 2022-08-21
Rated 5 out of
5 by
jeff from
Works great with the fixOriginally a 1 star. Had the same problem as the other 1 star reviews. Worked first time and then nothing. After investigation, I found the oil leaked out. Take the oil plug out, fill with tool oil, and make sure the o ring is in the recess on the plug. Mine was down on the threads of the plug. Once I made that fix, it works a treat. Like brand new again.
Date published: 2021-03-12
Rated 5 out of
5 by
ChrisB from
Works very well.I just used this today and it worked perfectly. Sure beats hammering or hand flanging.
Date published: 2018-10-21
Rated 5 out of
5 by
parkertech from
heavy duty, should last forever.works as expected, should have bought it long ago!
Date published: 2018-06-11
Rated 5 out of
5 by
BelAirGuy from
Great tool for the jobI have owned this tool for about 2 years and I am restoring a 1960 BelAir and its been a rustbucket but this tool has come in real handy for flanging metal and getting the panels prepped. Punches through 16 gage steel no problems (@120 psi) Just make sure you have a compressor that can power this tool the to the best of its ability. Swivel neck makes for the right angles in how you hold the tool.
Used my Rockwood flange/punch tool only a few times. Now the punch die is stuck on the metal and won't release. How do I get it loose?
Asked by: t_bone
If the gauge of the metal it is too thick or the air supply was inadequate it won't do a complete punch and can bind.
To release it you will need to either pry the moving Jaw upward or do a a partial disassembly of the head to release it.
Answered by: John S
Date published: 2020-09-10
What would be the compressor with the least gallons of capacity which works well this Tool
Asked by: Wilfredo
And a compressor of less than 30 gallons although it has 90 psi
Answered by: Wilfredo
Date published: 2020-03-24
I have an Eastwood Pneumatic Perfect Panel Prep Tool. Do you sell the dies to convert it to an Air Punch and Flange Tool?
Asked by: Richard
unfortunately, the tool is as is, there are no additional dies or punches for that tool.
Answered by: Bob G
Date published: 2023-06-30
Wil this tool make a curved flange, say, as when following a curved patch panel around a wheel arch?
Asked by: ZeeResto
This tool will not do curved flanges.
Answered by: ZachC
Date published: 2020-03-05
Specs indicate tool will flange 16 gauge steel. I will be using tool exclusively to flange 16 gauge steel to build floor. Because I am using tool at its limit is it heavy duty enough for 16 gauge only?
Asked by: Old Norse
16 gauge mild steel is the heaviest this will flange.
Answered by: SeanW
Date published: 2018-11-06
How long is the warranty on this item? What does the warranty cover?
Asked by: Familyof10
This item has a 1 year warranty against manufacturer defects.
Answered by: Kelly H
Date published: 2019-12-10
where is it made?
Asked by: mikey327
This tool is manufactured in China to Eastwood's specifications.
800-343-9353 
Chat 
