Item #
20652
BRAND: Eastwood
Eastwood TIG Welding #10/12 Gas Lens Components Kit
Gas lens improves shielding gas coverage
Gas lens improves shielding gas coverage
Gas lens improves shielding gas coverage
Loading...
- 90-Day Returns
- Technical Support
- 90 day Warranty
- In Stock
Frequently Bought Together
Total Price
Description
A gas lens improves shielding gas coverage by distributing shielding gas around the tungsten more efficiently with less turbulence than a conventional design. A gas lens also allows the tungsten to protrude further out of the torch for more maneuverability and better visibility of the area you are welding and of the arc itself.
This kit specifically helps with gas coverage when welding Stainless Steel, where wider coverage is needed to keep the weld clean throughout.
Contents
Kit includes the following:
(2) Gas Lens Body, 1/16” [1.6mm]
(2) Gas Lens Body, 3/32” [2.4mm]
(2) Collet, 1/16” [1.6mm]
(2) Collet, 3/32” [2.4mm]
(2) Gas Nozzle, 5/8” [#10]
(2) Gas Nozzle, 3/4” [#12]
(1) Gas Nozzle Reduction Collar
(1) Partitioned Plastic Case
(2) Gas Lens Body, 1/16” [1.6mm]
(2) Gas Lens Body, 3/32” [2.4mm]
(2) Collet, 1/16” [1.6mm]
(2) Collet, 3/32” [2.4mm]
(2) Gas Nozzle, 5/8” [#10]
(2) Gas Nozzle, 3/4” [#12]
(1) Gas Nozzle Reduction Collar
(1) Partitioned Plastic Case
Accessories
Eastwood 14 Pieces Tig Welding 10/12 Gas Lens Components Collet Body Kit Torch Accessories Cup Alumina Nozzle Stubby Gas Lens 17 & 18 & 26 Size Torches
Instructions
Safety Information
Always follow manufacturer's instructions for proper safety requirements when performing welding tasks.
Customer Reviews
Questions & Answers
I have the everlast tig welder with the sr-26 would this kit fit ?
We can only guarantee compatibility with our machines. These consumables are designed to fit our units which we utilize a WP-17 style torch
Date published: 2019-02-17
Will this kits fit with TIG torch MP250I, it says w26 ?
Yes, this kit will work with the TIG torch in reference.
Date published: 2019-02-17
Will this kit fit a magnum torch on a Lincoln 185 Square Wave?
This kit has only been tested with our tig welding torches.
Date published: 2018-11-19
I have the Eastwood tig200 and I bought the lens kit for it and I was just testing it out I was having problem welding aluminum with it on ac. I didn’t have a problem welding stainless with it. I switched back to my furick setup and it worked just fine.
Aluminum is very sensitive to proper shielding gas flow. Ensure you have the correct flow rate for the gas lens you're using. With larger cups you may have have to bump the flow slightly higher than the stock recommendation.
Date published: 2019-02-17
I have one set of gas lenses from another vendor that did NOT fit my torch, so I want to be sure. My Chicago Electric (Harbor Freight) cheapo TIG rig has a torch that says "WP 26" on the handle, and looks like a WP 26. Should work, right? Returnable?
It certainly sounds like you have a number 26 torch and our gas lens kits certainly fit number 26 torches so you should be good to go. If you find the parts don't work a simple call to our Customer service team can get you taken care of.
Date published: 2019-02-17
Can I buy this 20652 kit with a 1/8 collet and gas lens set of four?
All of our Gas lens kits are currently available in 1/16 and 3/32 sizes only.
Date published: 2018-05-21
would this fit a Snap On 150i tig welder?
This kit will fit all TIG welders that utilize a number 17,18 or 26 torch.
Date published: 2019-02-17
Eastwood TIG Welding #10/12 Gas Lens Components Kit
Retrieving Price...
In Stock