Christmas In July
  • Home
  • Eastwood MIG Welder Welding Cart
Eastwood MIG Welder Welding Cart is rated 3.8 out of 5 by 35.
Rated 5 out of 5 by from Great Purchase A great cart with a 300 pound capacity that nicely accepts the welder and tall mixed gas bottle, all that for a great price, too!
Date published: 2018-12-21
Rated 5 out of 5 by from Eastwood MIG Welding Cart - my added improvements: My added improvements for protection and safety. Line the shelves with a roll of Harbor Freigh Tool Box Liner (18" x 72" roll) material to protect the paint for a little over $6. Then cut a piece about 7" wide by 18" long to put on the back where the tank locates so the paint will not get scrubbed off the rear panel. For safety to keep the safety chains in place so they can not come detached from the grove they slide down into, I got four 1/2" bolts and four 1/2" nuts along with 8 large 1/2" flat washers (one for each side of bolt) and put them in through the holes and tightened then down lightly. This is the perfect size to go through the holes on the back panel to keep the chains from coming out of the slots when pushing cart around on uneven ground outside. With my 80CuFt tank, the chains fit tight, so I had to pull on them to get the chain to slide into the slot because it secures the tank better. One of the chains was just a tad loose, which I did not want, so I twisted the chain one turn and everything was nice and tight. It only cost me $4.13 at Home Depot for the bolts, nuts, and washers, which in my opinion is cheap for SAFETY of not allowing chains to come off and take the chance of tipping your tank over and busting the gauges and pulling the MIG off of the top shelf. I know some will think that the hole is 3/4" the chain goes through, but believe me the 1/2" works great, are less expensive, and the large flat washers is what keeps the chains from coming out of their slots. It is just the normal size washers in their bulk bins, but they are large in diameter. This size fits flush with the rear panel. While this cart looks the same as the Harbor Freight one, notice the wheels are larger. With the Eastwood Cart. The Harbor Freight Cart has the axle much smaller than the holes in the cart and would need to have bushings. So, the bottom line is you get what you pay for. Eastwood has specifications they make the manufacturers built their products to, Harbor Freight does not have specifications, they just sell what ever junk is shipped to them.
Date published: 2018-07-28
Rated 5 out of 5 by from Welding cart Good cart. Had fun put it together and works great.
Date published: 2018-01-18
  • y_2019, m_7, d_16, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_35
  • loc_en_US, sid_20232, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Good Morning, Will a Versa Cut 60 fit on the Bottom Shelf?

Asked by: Subers_Garage
A versa cut 60 will fit on the bottom shelf.
Answered by: SeanW
Date published: 2018-11-29

will this cart carry a large gas tank?

Asked by: jimmy mac
This cart holds up to a 125 Cubic foot tank
Answered by: Scott C
Date published: 2018-12-29

What is the maximum weight for this product?

Asked by: redrum
The maximum weight for this cart is 300 lbs.
Answered by: SeanW
Date published: 2018-05-23

Can this product be delivered/shipped to Portugal

Asked by: Caita
While we cannot ship internationally to individuals we do have international distributors, one of which may be close enough for you to work with. Here is a link to the page which contains all our distributors and their contact information. https://www.eastwood.com/customer-service-onepage
Answered by: Scott C
Date published: 2018-05-21

Will this cart hold the MIG 175 AND A VERSA 60 Plasma cutter?

Asked by: The Mike
This cart is a little small. You will want to consider our cart 11616. https://www.eastwood.com/mig-tig-plasma-welding-cart.html
Answered by: Scott C
Date published: 2019-02-02

Will this cart hold my 250 mig

Asked by: Starcraft
This cart will not fit the MIG 250 as it is large. Our professional cart is perfect for the MIG 250.
Answered by: Scott C
Date published: 2018-12-20

What gauge sheetmetal is this made from?

Asked by: mickeykreg
This is made of 16 gauge sheet metal.
Answered by: KHoffnagle
Date published: 2018-12-20

made in china?

Asked by: marko2112
This welding cart is manufactured in China.
Answered by: S Church
Date published: 2017-09-18
  • y_2019, m_7, d_16, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_20232, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood MIG Welder Welding Cart

Eastwood MIG Welder Welding Cart

Item #20232 Brand: Eastwood

Transport a MIG welder or Plasma 40, gas bottle, accessories
Quantity:
Quantity: close

In stock

Only $69.99

 

< Back

Details

With this Welder Cart you can roll your MIG welder and all its accessories on this sturdy 4-Wheel Welding Cart.

The Eastwood MIG Welder Welding Cart Features:

  • Welder Cart assembles with basic hand tools
  • Includes safety chains
  • 28" tall, 27" long overall, 30 lbs.
  • Holds up to a 125 Cubic foot tank

This steel MIG welder cart is designed to transport our MIG 135, MIG 175, welder and Plasma 40 along with gas bottle. Also has room for hoses, welder's helmet and welding accessories.

Eastwood MIG Welder Welding Cart

Designed to hold our MIG 135, MIG 175, Cut 40, and TIG 200DC. Provisions for a 125 cu ft bottle. Unit is 28 inches high and 27 inches in length length, which allows you to store it in tight areas. Includes a second shelf and works with our Welding Cart drawers 20181


More info...
< Back

Contents

One Unassembled cart


Specifications

Top Shelf: 17.75” X 11”
Middle Shelf: 15” x 11”
Bottom Shelf: 17.25” x 11”
Overall Height: 28"
Overall Length: 27"
Weight: 30 lbs.
Maximum weight capacity:300LBS


Instructions

Click here for product instructions


Safety

Always secure the gas bottle with supplied safety chains.

Click here to see welding safety products


Warranty

One Year Manufacturer's Defect Warranty.

100% Satisfaction Guarantee


Eastwood Offers Free Lifetime Technical Support


Click here for product SDS information


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: