• Home
  • Landau Black Interior Paint Aerosol 12 oz Net
Landau Black Interior Paint Aerosol 12 oz Net is rated 4.722222222222222 out of 5 by 18.
Rated 5 out of 5 by from Love this stuff!! Did the entire interior on my 67 GTO, I love it. Went from white and red to black. I cannot believe the results. Looks like it always was black. Once you complete the dyeing just let it cured for a day or so before using. Very easy to use, just do light coats and you are good.
Date published: 2014-12-29
Rated 5 out of 5 by from worked great repaired my 1970 torino dashcover and coated it with this afterwards, looks awesome and really stuck good, just clean it and scuff it down as suggested!
Date published: 2015-03-06
Rated 5 out of 5 by from Worked Great! Have used Eastwoods vinyl and plastic paints to change, or brighten existing interior components and have never been disappointed. I use the plastic promoter and all goes well. The can doesn't list dry times, or much else relative to using this product. Kinda makes you feel a little leery - but it worked out fine. Seems to stand up to medium use well. Used it on interior plastic, not the seats - where the wear is much harder. Flows on and covers well. Use light coats when spraying. Parts held vertically have a tendency to run, unless the coats are thin and dry time of at least an hour is adhered to between coats. Spray at temp of 70º or higher.
Date published: 2016-01-21
Rated 5 out of 5 by from excellent product This is my second purchase of this product. First I refinished my leather steering wheel from my 1981 Fiat Spider. Next I refinished my new dash that had a terrible finish. Now it looks like factory new. Absolutely the best product for these jobs. I gave my Brother-in-Law a little of the paint and he quickly bought more and refinished the leather interior in his 1937 Chevy Street Rod. You have two dedicated customers. I would recommend this to anybody.
Date published: 2013-06-03
Rated 3 out of 5 by from Good, but not great! Covers well, and goes on very even. Color match is good, but it seemed to adhere to flexible surfaces better than hard surfaces. For example the sunvisors & arm rest pads were great, very durable. But on the dashboard (70s Ford hard plastic) it scratched off very easily. It's easy to retouch, but this was after the parts had been thoroughly cleaned, dried & sprayed with adhesion promoter. A little disappointing given the price including postage.
Date published: 2010-08-16
Rated 5 out of 5 by from Product Worked GREAT!!!! I was doing a complete color change on my 84 Corvette from grey to black. I wasn't sure I could do it myself so I sent some of the parts out to the professional shop. I used the Landau Black Interior Paint with the 52366Z SEM Plastic Adhesion Promoter on the parts I did. To my surprise the parts from the shop showed sections of peeling and flaking within 2 weeks. The parts I did turned out GREAT!!! The color is a nice RICH black that looks like it came from the factory!!! No peeling flaking or rubbing off. Prep work was key. I took my time and made sure all surfaces were clean before applying any products and wiped them down w/isopryl alcohol before using the Plastic Adhesion Promoter. I also applied 3-4 light coats rather than one heavy coat. BOTH PRODUCTS WORKED GREAT AND EXCEEDED EXPECTATIONS!!!!!!! I think I'll be redoing the parts I got back from the shop next :)
Date published: 2012-04-21
Rated 4 out of 5 by from Excellent finish I am very impressed with the look of this paint. It has brought back my 1969 buick parchment vinyl to look almost new. Just be sure to spray when the temperature is above 70° as recommended. I tried when it was cooler (Chicago "spring" weather) and the paint splatteresd a bit. Sprays nice when temperature is correct.
Date published: 2013-05-17
Rated 5 out of 5 by from Great value for the buck I used the product on hard and one piece of soft vinyl and its holding up great
Date published: 2011-01-23
  • 2016-07-23T07:41CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_en_US, sid_11449Z, PRD, sort_relevancy
  • clientName_eastwood

Does this product work on fabric seats? Also fabric on doors and Capet?

Asked by: Alexx123
This is not intended for use on Fabric.
Answered by: KHoffnagle
Date published: 2016-03-30

how much does one can cover? one seat?, half a seat, the whole interior? thank you

Asked by: frankiebones
One can covers 6 sqft. Which would equate out to 1-2 seats.
Answered by: SeanA
Date published: 2014-11-10

Hi, is this product recommended to paint my sun visors?

Asked by: alexis27
I have used this product to change the color of my white vinyl sun visors to black in my VW Beetle. Make sure you use Vinyl Prep before applying. http://www.eastwood.com/vinyl-prep-aerosol-14-09-net.html
Answered by: NickC
Date published: 2014-09-25
  • 2016-07-23T07:40CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_11449Z, PRD, sort_recentAnswersFirst
  • clientName_eastwood

Landau Black Interior Paint Aerosol 12 oz Net

Item #11449Z Brand: SEM

UV- and abrasion-resistant enough for vinyl tops; flexible enough for seats


Freshen the look of faded vinyl and plastic with our Interior/Upholstery Paint in "Landau Black" Renew or change the color of vinyl, leather, and plastic automotive interior and vinyl tops with this specially formulated aerosol coating that won't peel.
  • "Landau Black" color
  • Excellent scuff resistance
  • Flexible enough for seats
  • 12-oz. aerosol covers about 6 sq. ft.

More info...

About Landau Black Interior Paint Aerosol 12 oz Net

Restore or change the color of plastic, vinyl, carpet, and velours. Produces a coating that is flexible enough for seats. Abrasion and UV resistant enough for convertible and vinyl tops. Can even be used on carpets to freshen up the existing shade. This specially formulated elastomeric coating matches many OEM specs for appearance, scuff resistance and overall durability. Each can covers about 6 square feet. For optimum results and adhesion use the (52366Z) Adhesion Promoter Aerosol before applying color. Colors shown are approximate.


Aerosol net weight 12oz


52366z Vinyl Adhesion Promoter 52056z Plastic and leather adhesion promoter 52354 5-PC Door Panel tool set 43459 Nylon pry tool set


52366Z SEM Plastic Adhesion Promoter


Always wear eye, skin and respiratory protection when painting. Always paint in a well ventilated area away from open flame.


Made in USA


For best results, use when can is 70°F. Clean surface with warm soap and water. Ensure surface is dry before painting. Hold can approximately 6-8” from the surface to be coated. Apply light “mist” coats allowing 5-10 minutes between coats. Several thin coats give a better finish than one heavy coat. Carpet and Velour: Spray one light mist coat and immediately brush in all all directions using a nylon bristle brush. Apply a second light mist coat and brush again.

Customers also viewed: