• Home
  • Metal Blackening Kit with Diamond Clear

    Metal Blackening Kit with Diamond Clear

    Item #10238Z

    Spray-on an OE black oxide finish; includes protective Diamond Clear

    Details

    Spray-on an OEM-matching black oxide finish with our Metal-Blackening Kit... right in your own shop Not a paint or dye, Eastwood's Metal-Blackening System provides a true OEM-type black oxide coating on any iron or steel part.
    • Takes only minutes to transform
    • Safe and simple
    • Includes protective Diamond Clear Satin

    About Metal Blackening Kit with Diamond Clear

    Auto makers have long used black oxide as an attractive coating for hardware. This economical black semi-gloss finish is often used on latches, hardware, brackets and many other automotive parts. Now you can reproduce the OEM look of black oxide at home! Not a paint or dye, Eastwood's Metal Blackening System provides a true OEM-type coating on any iron or steel part. It's safe and simple! Each piece takes only minutes to transform. The kit contains every thing you need: one pint of blackening concentrate, one aerosol Satin Diamond Clear, one process bottle, gloves, goggles, and detailed instructions.


    Contents

    The Metal Blackening system includes one pint of Blackening Solution Concentrate, 1 aerosol Satin Diamond Clear, a pair of disposable gloves, goggles, process containers, and complete instructions.


    Accessories

    With use the blackening solution loses its strength and eventually, needs to be replaced with replacement Blackening Solution Concentrate (10113ZB). For Replacement Sealant use (10300Z) Diamond Clear Satin for Bare Metal.


    Safety

    Use in a well ventilated area. Read and understand all instructions.


    Warranty

    Made in the USA. 30 Day Eastwood Warranty.


    Application

    This system is appropriate for applying a non-dimensional black oxide finish to steel and iron. This system is NOT for use on aluminum, brass, copper, or stainless steel. Steel and iron parts to be blackened need to be thoroughly cleaned by removing all grease and other coatings down to bare metal. Cleaning with a solvent like PRE Painting Prep (10041Z), and chemically cleaning with Fast Etch 16oz(19416Z), 32oz (19415ZP), or gallon (19418ZP), is recommended to assure that an even blackened coating is achieved. Rinse coated parts in water, and force dry then spray with Diamond Clear Satin for Bare Metal.


    Customers also viewed: