Item #
12113
BRAND: Eastwood
3-Pack Ceramic/Rubber Blast Nozzle 3.5MM ID
Designed to be extremely efficient with CFM usage and extended life
Designed to be extremely efficient with CFM usage and extended life
3-Pack Ceramic/Rubber Blast Nozzle 3.5MM ID is rated
out of
5 by
7.
Designed to be extremely efficient with CFM usage and extended life
100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.
- • 90 Day Returns
- • Lifetime Tech Support
Frequently Bought Together
Price for all checked items:
Product Overview:
Description
Pack of 3 Replacement Nozzles 3.5mm ID for the (12064) 100 Lb. Pressure Blaster and the (12065) 200 lb. Pressure Blaster. Requires 20 cfm at 80 psi.
In the Box
Contents
Guides & Accessories
Safety Information
Accessories
Application Tips
Requires 20 Cfm At 80 Psi
Reviews
Rated 5 out of
5
by
quir1960 from
sand blasting
5mm works great with 60 grit of sand. Recommend having at least 2-3 pack ceramic /rubber blast nozzle.
Date published: 2015-08-16
Rated 5 out of
5
by
Anonymous from
Ceramic Nozzels
Hello there,
Just recently picked up a couple of 3 packs of the ceramic nozzels. The 3.5 and 5 mm inside diamiter nozzels. Both set worked very well for my application. Overall a good product for a great value and Eastwood had it to me in no time. Will definitely buy from Eastwood again.
Bill
Date published: 2011-05-08
Rated 4 out of
5
by
RickP from
regular replacement
These require regular replacement to best operation of blaster and I have not found a local source for ordering the correct sizes
Date published: 2020-12-22
Rated 4 out of
5
by
Master Blaster from
Blast Nozzles
Bought a 3 pack of 5mm Nozzles as all the smaller sizes included in the Deadman Blaster Nozzle wont work with the Silica Sand sold at my local Hardware Store. The 5mm tips seem to work, but wish they also sold a 7mm.
I feel the price on these is a bit high and they should sell a six pack for about the same price. Make sure you have the right media as the smaller tips didnt work for anything I could get loacally. Shipping bags of media is expensive!
Date published: 2020-03-25
Rated 4 out of
5
by
Decadance from
Great Nozzles
They shoot great for the blasting I need done. I just wish they lasted longer before wallowing out and becoming too large to use.
Date published: 2015-05-16
Questions & Answers
Will this tip work with walnut media?
Based on the context provided, it’s not specified which specific media is suitable for use with a Ceramic/Rubber Blast Nozzle 3.0mm. However, Eastwood offers a wide assortment of specialized abrasives including ground glass, glass beads, silicon carbide, aluminum oxide, walnut shells, and soda media. It’s recommended to choose the media based on your specific needs such as rust removal, paint removal, or surface profiling.
Date published: 2023-09-20
Is there a reference chart for nozzle sizes vs various blast media types available somewhere? I can't seem to find anything.
We do not offer a chart. However, the more corse materials should be shot out of large tips like the 3.5 and 5.0 while less aggressive media be used on the smaller nozzles.
Date published: 2019-09-24
What size nozzle is generally used for silica sand blasting?
We do not recommend the use as sand as a media for blasting, due to the health issues that sand can cause.
Date published: 2019-09-23
Is there a nozzle available that can deliver a more directed spray of media?
We have a nozzle that goes all the way down to 2mm. We also have 2.5mm and 3mm packs of these. This would be much more directed. Here is a link; http://www.eastwood.com/3-pack-ceramic-rubber-blast-nozzle-2-0mm-id.html
Date published: 2015-06-29
what size of blast media Grit can I used with this nozzle? 30-60 or 48-80 media grit?
With all of our equipment you should not run anything more aggressive than 60 grit
Date published: 2018-05-07
3-Pack Ceramic/Rubber Blast Nozzle 3.5MM ID
$18.99
In Stock