close
Find Anything, Fast!

Need Support or Have a Question?

Click Here
Holiday Gift Guide
  • Home
  • Coldshield Thermal Paste
Coldshield Thermal Paste is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from works great I bought this to weld window rivets to regulator with nylon rollers worked great with out melting the nylon rollers
Date published: 2015-03-01
Rated 5 out of 5 by from Cold Shield I found it better to have the Cold Shield back over an inch away from the weld. Closer It was to easy to get a cold brittle weld. Other than that it works as advertised. Where a 1/4 stick weld was easily held by hand when the cold weld was one inch away from the weld and two thick before bare hand held metal.
Date published: 2014-09-22
  • y_2018, m_10, d_21, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_13904, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Is this stuff reusable?

Asked by: billarroo1
The cold shield paste can be reused.
Answered by: SeanW
Date published: 2018-10-01

Is this reuseable

Asked by: buddy
This product is able to be reused. You will have no make sure it goes back in the container while it is not too hot.
Answered by: SeanW
Date published: 2018-07-25

What is the difference between this product and Eastwood Anti-Heat Compound?

Asked by: Scott
There is honestly no difference. The Anti- Heat is our brand or version of the Cold Shield.
Answered by: Kelly H
Date published: 2018-05-17

I want to weld stainless sheetmetal with an aluminum backer bar. If I apply Coldshield between the two will it facilitate the transfer of heat from the ss to the aluminum or will it block it?

Asked by: Imaginator
This product is designed to block heat and minimize any transfer.
Answered by: S Church
Date published: 2018-03-01

Is product reusable?

Asked by: 2stackjack
This product is not designed to be reusable.
Answered by: KHoffnagle
Date published: 2018-03-01

I was wondering if this product can be used as a welding clay to form or hold parts.Thanks Chris M

Asked by: Gravelyman
This product is not designed to be used in those manners.
Answered by: S Church
Date published: 2016-07-06

Will this product produce the same results for cutting with torch or cutoff wheel? Can i use this on a painted surface to protect the paint from heat damage?

Asked by: Chive365
It will slow the heat transfer from practically any method of panel repair including welding and torch work.
Answered by: S Church
Date published: 2018-03-01
  • y_2018, m_10, d_21, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_13904, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Coldshield Thermal Paste

Coldshield Thermal Paste

Item #13904

Works as a heat sink to protect against weld heat damage and warping
Quantity:
Quantity: close

In stock

Only $32.99
< Back

Details

Stop Welding Heat Damage - This is the kind of product that you have to try to believe how well it works! We held onto a small metal panel while a torch heated the metal almost white hot. The part in my fingers never went above about 85 degreesF! That's the kind of protection Cold Shield provides. Imagine how well Cold Shield will work for you the next time you need to weld close to plastic trim, wiring, or when you want to minimize panel warpage and paint damage. Once the job is done just wipe it off with a water dampened clothe. Cold Shield is non-toxic and bio-degradable. 32 oz. jar. Made in USA.

More info...
< Back

About Coldshield Thermal Paste

Stop Welding Heat Damage - This is the kind of product that you have to try to believe how well it works! We held onto a small metal panel while a torch heated the metal almost white hot. The part in my fingers never went above about 85 degrees F! That's the kind of protection Cold Shield provides. Imagine how well Cold Shield will work for you the next time you need to weld close to plastic trim, wiring, or when you want to minimize panel warpage and paint damage. Once the job is done just wipe it off with a water dampened clothe. Cold Shield is non-toxic and bio-degradable. 32 oz. jar. Made in USA.


MSDS Sheet

Click Here for Material Safety Data Sheet


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov



< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: