DO THE JOB RIGHT.
Details
Eastwood' Contour® Polyester Glazing Putty is designed to fill pinholes, sanding scratches and minor imperfections prior to painting.
Unlike other glazing putties, it can be spread over larger areas to fill imperfections without distorting contours. Easily spreads very thin and can be sanded to an ultra-thin feather edge. Use over sanded substrates, steel and galvanized steel. Can also be mixed with body fillers to improve their spreading and sanding ability. 5-ounce net weight. Includes cream hardener.
Unlike other glazing putties, it can be spread over larger areas to fill imperfections without distorting contours. Easily spreads very thin and can be sanded to an ultra-thin feather edge. Use over sanded substrates, steel and galvanized steel. Can also be mixed with body fillers to improve their spreading and sanding ability. 5-ounce net weight. Includes cream hardener.
Contents
5 ounces net weight
Safety
Always wear eye, skin and respiratory protection when using this productalways apply in a well ventilated area.consult MSDS and product label for specific safety warnings
Warranty
made in Canada, 90 day defect warranty
Application
Surface must be clean and free of wax, grease and debris.Abrade surface using 36 grit, or finer.Thoroughly mix desired amount of material with cream hardener.Do not exceed 1/4 inch depth. Allow to cure 15 min before sanding.Abrade with 120 to 180 grit to desired contour. Use a finer abrasive to achieve finer finish If necessary, apply Eastwood Polyester Glazing Putty final finishing. Topcoat with quality primer such as Eastwood Epoxy or Urethane Primers. Do NOT return catalyzed material back into can.
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
