Do the job right
800-343-9353

Home
Devilbiss 3-Gun Kit

Devilbiss 3-Gun Kit is rated 3.8 out of 5 by 6.

Rated 5 out of 5 by Tommy T from Nice Guns for the price Lost the main paint guy at work so someone needed to step up, since he took his guns with him I looked at a massive amount of sites. picked the guns I wanted and found Eastwood with the best price. Ordered them, delivery very good, Guns shoot the same as my Devilbiss JGA pressure gun I have had for years. Paint quality very good, am using Sher-Kem paint reduced 20%. Paint looks like it could be on a car. Very good guns for the price. Thanks Eastwood

Date published: 2016-01-27

Rated 5 out of 5 by Justin93 from Great Kit, DeVilbiss Quality! Had these for a while now, overall great kit. Perfect for beginners and the at home D.I.Y. enthusiast. They Spray very well, the key is taking your time and making sure you follow directions. Quality seems to be the same as the Higher end DeVilbiss and Binks guns (Compared to spray guns at my workplace)

Date published: 2015-03-11

Rated 5 out of 5 by TSMAVERICK from OUTSTANDING PRODUCT HAVE USED A LOT OF GUNS COSTING ALOT MORE MONEY WITHOUT THE RESULTS THESE GUNS PRODUCE. OUTSTANDING PRODUCT.

Date published: 2009-06-18

Devilbiss 3-Gun Kit Reviews - page 2

Can I use a pps adapter and if so what size

Asked by: Andy

Eastwood does not offer the 3m system. We do have the DeKups system. This is the starter kit Item #29953 https://www.eastwood.com/dekups-34-oz-pro-starter-kit.html

Answered by: Bob G

Date published: 2019-03-30

I have an accuspray HVLP turbine system. Could I use these guns with it? If not i have a 25gal system that does 9scfm at 90 psi.. what do you think? thanks

Asked by: Edward

These spray guns will not be able to be used on a turbine paint system. They will require a standard compressor which puts out at a minimum of 10 CFM @ 30 PSI.

Answered by: Scott C

Date published: 2019-01-05

Can the Devilbiss 3-Gun Kit Item #2049 use a 1.4mm tip. I am painting base coat silver metallic on a car and I need a gun with the 1.4mm tip

Asked by: steve1

While there are no 1.4 tips available for this gun you are only speaking of a 0.01mm difference in tip size. This 1.3 tip would serve you well for base coats and clear coating.

Answered by: Scott C

Date published: 2019-04-04

where are these paint guns made?

Asked by: bierbucket

These guns are made overseas in Taiwan.

Answered by: KHoffnagle

Date published: 2017-08-31

What is size of inlet hole of air line? 

Asked by: Vinit

These utilize the 1/4 inch NPT fitting.

Answered by: S Church

Date published: 2017-07-12

Where can I get a replacement cup for the detail gun? The threads strip easily.

Asked by: PetesGarage

We have them here under part number 15576.

Answered by: S Church

Date published: 2018-03-12

Can different size caps and needles be bought for the smaller gun for use with primer color and clear for use in tight places like under dash and trunk areas?

Asked by: Rob69Charger

We do not carry any other size nozzles or needles for this gun set.

Answered by: S Church

Date published: 2017-07-16

Will this guns work with a 27 gal craftsman pro compressor with 7.2 cfm at 40 psi and 5.8 at 90 psi 2 hp for like hoods and panals

Asked by: garza74

The large guns need 30 psi @ 13 cfm; the smaller gun needs 30 psi @ 8 cfm. Based on these requirements I would say your current compressor isn't going to be able to power these guns. On the other hand we do have the concours spray gun that runs a much lower cfm requirement. The nice part about this gun is that it also has replaceable nozzles making it able to do many different types of paint.

Answered by: S Church

Date published: 2019-04-04

Devilbiss 3-Gun Kit Questions - page 2

Devilbiss 3-Gun Kit

Item #20491

Includes 2 large HVLP guns,
1 small detail gun, accessories

Qty:

Quantity:

In stock

Only $225.99

Add to Wishlist

Details

These 3 precision spray guns from DeVilbiss® are the tools you'll need to take on any automotive paint job, from graphics and touch-up tasks to full repaints.

2 Large HVLP Guns
1 Small Detail Gun
3 Tips, 3 Cups, Regulator and Tool Kit

Take on any automotive painting job with this 3-gun DeVilbiss® Kit that includes one large HVLP Gun for primers (with 1.8mm fluid tip); one large HVLP Gun for top coats (1.3mm fluid tip), and one Small Gun for detailing and custom graphics (with 1.0mm fluid tip). The large guns require 30 psi @ 13 cfm, small gun requires 30 psi @ 8 cfm.

More info...

3-gun kit includes

(2) large HVLP Guns
(1) Small Detailing Gun
(3) Nozzle Needles (1.8mm, 1.3mm, 1.0mm)
(2) 600ml Aluminum Paints Cups
(1) 250ml Nylon Paint Cup
(1) Gun-Mounted Air-Adjusting Valve with Gauge
Cleaning and adjustment tools

Accessories

29953 34-oz. DeKups® Disposable-Cup Starter Kit
50040ZP Master Paint Kit
10041Z PRE Painting Prep
12817 Paint Gun Accessory Kit
51136 Eastwood Paint Color Chart
20474 4-Stage Air Dryer System

FAQs

(Q) Will these guns work with any kind of paint?
(A) These were designed for solvent-based paints, primers and clears.

(Q) What are the compressor requirements?
(A) The large guns need 30 psi @ 13 cfm; the smaller gun needs 30 psi @ 8 cfm.

(Q) How can I learn to paint competently?
(A) Check out Eastwood's full line of training books and DVDs.

(Q) How do I prevent compressor moisture from ruining my paint job?
(A) See our full line of air dryers and filters. Search for "air management".

Safety

Always wear a NIOSH-approved respirator, eye protection and skin protection when painting. Consult paint label and MSDS for exact safety precautions. Always paint in a ventilated area away from open flames or sparks. Consult local and federal laws when disposing of excess paints, primer clears and solvents.