Protect air-powered tools in your shop with an Eastwood Complete Filtration System.
It’s one thing to kick up a little dust while working on a project. It’s another thing to use strong chemicals with powerful fumes when cleaning certain parts.
- Filters particles down to 1-micron
- Air Pressure Regulator
- 0 to 150 psi air pressure gauge
- Integral mounting bracket
The Regulator features a 0 to 150 PSI Gauge. It also features an integral mounting bracket for secure mounting and can be easily upgraded to air drying capability with the optional Eastwood #51567 or DeVilbiss #130524 Desiccant Kit.
But using compressed-air tools is another matter entirely. Those tools are powerful and require a significant investment. But if the air that’s fed into them contains contaminants or other impurities, it can cause damage at one of the most critical points of your tools. As for painting: The No. 1 enemy of painting or powder coating is moisture.
Eastwood’s Complete Filtration System solves that problem. This system is equipped with a high-capacity canister with a 1 micron coalescing filter, as well as a petcock drain to trap moisture. It can also be adapted for applying desiccant.
This air filtration system for garage shops gives you everything you need to work with confidence and protect your auto body tools.
1/2” NPT Female Inlet
1/4” NPT Male Outlet
Maximum service pressure
150 PSI (10.3 bar)
Air flow capacity
Maximum service temperature
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov