Eastwood Atomic Pink Powder
- 90-Day Returns
- Technical Support
Create a one-of-a-kind custom candy finish with Eastwood Atomic Pink Translucent Powder!
- Cure Time: 20 Minutes @ 400°F (actual surface temperature)
- 100% Virgin Powder
- Gloss Level: High - 85% to 90% at 60 Degrees
- Powder Type: Polyester TGIC
- Storage: <80°F, well ventilated, <60% humidity
- Durable enough for under hood applications and heat resistant up to 250 degrees F
This durable translucent top coat acts as a colored tint for your base powder or bare substrate. Apply alone as a single stage, over chrome powder to create brilliant pink chrome, or over any other metallic or textured base powder for a dramatic candy finish! When applied over a bright white powder, Atomic Pink will appear as a bright fluorescent pink.
Split image shows left side over white base and right side over chrome base.
Finish: High Gloss
Gloss Level: 85 to 90 at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet
1 Pound powders are packaged in plastic Bags
Apply using Eastwood DIY HotCoat Gun 10198 or the Eastwood Dual Voltage HotCoat Gun 11676.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Questions & Answers