• Home
  • Eastwood Ceramic Engine Paint Chevy Orange Quart

Eastwood Ceramic Engine Paint Chevy Orange Quart

Item #51618ZP Chevy Orange Engine Paint

Ceramic nano-technology engine
enamel withstands 650 degrees F
  1. EW Ceramic Engine Paint Quart Chev Ornge
    Item #51618ZP
    Only $31.99

    In stock

  2. Eastwood Urethane Activator 8 oz
    Item #21854Z
    Only $14.99

    In stock



Eastwood's "Chevy Orange" Ceramic Engine Paint withstands up to 650 degreesF

  • Withstands up to 650 degreesF (highest in the industry!)
  • Easy to apply – brush or spray
  • 1-quart can covers approx. 40 square feet
  • For additional durability and gloss, add Urethane Activator (21854Z)

Super-durable engine paint utilizes ceramic nano-technology to produce a beautiful, factory-look finish that protects your engine and resists chips, chemicals and heat.

More info...

About Eastwood Ceramic Engine Paint Chevy Orange Quart

Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F. Developed using the latest ceramic nano-technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.


32 Fluid Ounces 1 US Quart


Click here for product information sheet


Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.


Made in USA


To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

Customer Reviews

Questions & Answers